Simon O’Rourke

simon o'rourke carving ken dodd sculpture using chainsaw with bar in collaboration with chainsawbars.co.uk

Collaboration with ChainsawBars.Co.Uk

Collaboration with ChainsawBars.Co.Uk 1200 900 Simon O'Rourke

We thought we’d take the opportunity of a lull in new sculptures to share some more from ‘behind the scenes’.  There are so many companies and individuals that are part of treecarving.co.uk. In the past we’ve shared about Acton Safety, OlfiCam and Treetech. This week we’re going to share a bit about our collaboration with ChainsawBars.Co.Uk.

simon o'rourke carving ken dodd sculpture using chainsaw with bar in collaboration with chainsawbars.co.uk

What is a Chainsaw Bar?

Firstly, let’s explain what a chainsaw bar is!
Basically, the ‘bar’ is the long piece of metal at the front of the saw, that the chain goes on. It’s typically an elongated bar with a round end of wear-resistant alloy steel. They are usually 40 to 90 cm (16 to 36 in) in length, although that can vary for more specialised work.  An edge slot guides the cutting chain. Specialized loop-style bars were also used at one time for bucking logs and clearing brush, although they are pretty rare now due to increased hazards of operation.

Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter.

Chainsaw bars also have different specifications, such as coatings that make them more rust or water resistant. Add different chain options, and you get a LOT of different performance options. It’ll come as no surprise to you then that having a good choice of equipment is essential when we look for equipment suppliers, as well as them needing to have solid product knowledge. That’s where our collaboration with ChainsawBars.Co.Uk comes in.

close up of a chainsaw bar from a carving in process by Simon O'Rourke

About ChainsawBars.Co.Uk

ChainsawBars.Co.Uk is a British company run by Rob Dyer.  It has the largest online stock of chainsaw chains in the country, suitable for most chainsaw makes and models. Importantly for Simon, they are the only importer of Sugihara guide bars and ManpaTools in the UK.  One of their ‘claims to fame’ is that they supply 80% of the Japanese pro market. ChainsawBars.Co.UK is not just a retailer though, and they have been manufacturing bars themselves since 1967.

Those who follow Simon on social media will know that his ManpaTools angle grinders are an essential on his equipment list. Being able to obtain their tools easily and efficiently (such as the multicutter Simon is using to create fur in THIS VIDEO) is extremely important to us, so we’re thankful ChainsawBars.Co.UK make that possible!

Simon O'Rourke work in progress using chainsaw bars from our collaboration with chainsawbars.co.uk

Our Collaboration with ChainsawBars.Co.UK

Simon has been a loyal customer of Chainsawbars.Co.UK for several years now. But the relationship goes beyond that.  As well as buying Sugihara carving bars and ManpaTools before, Simon also reviews products for him.

One of the great things about ChainsawBars.Co.UK is their product review videos on their YouTube Channel. As Simon has been involved with creating these, we know that when you watch a review, it is genuine – something that’s SO important when buying equipment.  Below you can see Simon’s review of one of the products Rob Dyer created, the Panther Chainsaw Mill.

More Reviews
For those who are interested in finding out more about the equipment Simon uses, he will be producing some more review videos soon which you can find on his Facebook page, or YouTube Channel.
If you are looking to purchase chainsaw bars, chains, mills, we definitely recommend ChainsawBars.Co.Uk. They are knowledgeable, innovative, efficient and friendly. They also have some great loyalty discounts as an incentive! We are thankful for our collaboration with Chainsawbars.co.uk and the opportunity it gives us not just for great service and easy purchase of essentials, but also to see and try new products as they are released, and be part of the process of improving and developing them through our reviews and feedback.
Angel at the Pool of Bethesda sculpture by Simon O'Rourke at Biddulph Old Hall

Sculpture for Historic Property

Sculpture for Historic Property 420 630 Simon O'Rourke

alsoOne of the things Simon has enjoyed over the years, is creating sculpture for historic property. These projects usually combine Simon’s love of human form with his passion for storytelling. They also add value for the owner in sometimes unexpected ways. Over the years Simon has created many pieces for historic properties, ranging from National Trust homes or places of worship to private home owners. He has also had a season as ‘artist in residence’ at Erddig, a local National Trust property.
This week we share examples from that extensive portfolio, and explore the value of commissioning sculpture for historic property.

Highclere Castle Airman by Simon O'Rourke

The airman at Highclere Castle

Reasons to Commission a Sculpture for Historic Property: Commemoration & Storytelling

There are many reasons to commission a sculpture for your historic property. One of those reasons is to have a commemorative piece, to mark an event or occasion.  The Airman at Highclere Castle (pictured above) is an example of this. He is also an example of another reason for commissioning a sculpture. That is, story telling.  If you ever read our blog about the Highclere Airman, you will know that he tells a part of the story of that property. Although people may be aware of the history of a building, a visual aid telling that story is always powerful. Even traditional school text books become much more interesting with a picture! How much more so when the visual story telling is in 3D?! If your building is open to the public, this enhances their experience, which is always a good thing!

Mungo Park sculpture by Simon O'Rourke

A Tourist Attraction!

Another reason that a sculpture can add value to a historic sculpture, is it can become an attraction in itself. Take Mungo Park for example, photographed above.
This likeness of the Scottish explorer was created in 2014 for a Wetherspoons in Peebles, Park’s home town. It reflects the history of the area, so enhances the experience of the visitor, and helps provide information about the town. It also helps to set that restaurant apart from the others in the area. It’s a focus point for visitors – something unique the other eateries in town don’t have. It’s also fun –  customers also sit alongside Mungo on the bench outside the pub, for a photograph. And we all know the power of a shared photograph on social media!

 

Angel at the Pool of Bethesda sculpture by Simon O'Rourke at Biddulph Old Hall, Sculpture for historic property

Case Study: Angel at the Pool of Bethesda

One of Simon’s favourite sculptures that he has created for a historic property is the Angel at the Pool of Bethesda. She was carved from oak in 2016 as a commission for Biddulph Old Hall.  Although the property has an extensive history dating back to 1480, this commission relates to a 19th Century resident…..

The Story Behind the Sculpture

In 1871, attracted by the romance of the ruins in their moorland setting, artist Robert Bateman took up residence in the hall. He actually painted most of his best works in the Hall between 1871 and 1890. In 1874  he and the love of his life, Caroline Howard, were separated. Then, in 1876, Caroline married the Rev Charles Wilbraham. Bateman was heart broken, and painted The Pool of Bethesda as “an autobiographical cry of anguish”. The commission of the sculpture was to commemorate Robert and Caroline’s memory as part of the house’s story.

To read more about the history of the painting, click here.

Angel at the pool of bethesda by simon o'rourke at biddulph old hall is an example of sculpture for historic property

Creating the Sculpture

The setting with the angel stepping down a few steps towards a pool of water replicates the Bateman painting. The difficulty for Simon centered around the fact that all he had to work from was a flat 2D image. This meant that to begin with, he had to visualize what the painting would look like in 3D. From there, he then had to create what he was imagining. Which, according to owner Nigel Daly,  “he has done magnificently…. The piece fully represents the sense of Caroline stepping down into the water that Bateman created in the original painting.”

 

Testimonies of the Value Added

Obviously art always enhances or ‘adds’ something to a room, or wherever it’s located. However, in a historic property it does more than this. It captures the attention of the viewer. They are drawn in, as it narrates the story of that place. It also helps them envision, imagine and remember.

Nigel Daly is “thrilled” at the impact of the sculpture:
“Visitors never fail to gasp as they are led through a small octagonal tower from the ruins themselves into the small courtyard with the pool in its centre and Caroline at its head. As time has passed she has weathered beautifully to settle into the time-worn surroundings of the Hall.

The work has been much admired, and such is the skill of the work we are saving up for a second sculpture for the centre of the ruins based on Burne-Jones’s ‘Love Leading the Pilgrim’, which we feel is just up Simon’s street!”

Angel at the pool of bethesda by simon o'rourke at biddulph old hall

Your Own Commission

If you would like to enhance story-telling and scene-setting with a unique sculpture for your historic property, contact Simon on [email protected].

Poppy met stihl helmet and ear protection

When Poppy met Stihl!

When Poppy met Stihl! 1536 2048 Simon O'Rourke

We thought this would be a good week for something a little different, and a little fun. Simon has been sponsored by Stihl since 2017. It’s a perfect partnership, and a truly authentic one, as he really does love the quality, and range of products. Whether it’s a chainsaw he needs or protective clothing, Stihl have it covered! In this blog, we’ll share some of their products that are used almost daily – featuring our very own pet (and unofficial Tree Carving mascot), POPPY! Scroll down to see what happened when Poppy met Stihl!

Poppy Stihl with the MS500i

When Poppy Met Stihl: The Stihl MS500i

Obviously chainsaw art can’t happen without good, dependable chainsaws! The Stihl MS500i is a high performance saw that makes easy work of large pieces of timber. It uses innovative technology to achieve rapid acceleration from 0 to 100 km/h in an unbelievable 0.25 seconds! Definitely not for use on your garden hedge!  In fact, Simon describes it as a ‘beast’! With that kind of power, it’s his first choice for the large cuts to block out big sculptures.
With a hint back to our blog about Acton Health and Safety, this saw also features STIHL’s anti-vibration system. This is important for Simon for minimising some of the well-documented health challenges associated with vibrations from power tools.

When Poppy met stihl clothing

When Poppy Met Stihl: Advance X-TREEm Jacket

If a dog’s got to be out working in all conditions, they need a decent jacket.  The Stihl X-Treem jacket (see what they did there?!)  featured in all these photos does it ALL! We think Poppy makes it look pretty good too! Anyone know any canine modeling agents?
But back to the jacket!
Attachment points for saw guard…… Removable sleeves, spacer material on the shoulders and adjustable ventilation openings for comfortable regulation of body temperature……Ceramic dots on the elbows offer abrasion protection…..Outer shoulder zone has grip dot abrasion protection…… Large areas of high visibility orange with contrast areas for excellent visibility……Two breast pockets, one inside pocket and one sleeve pocket…..
What more could a dog want? Works pretty well for Simon too!

Poppy wasn’t so keen on wearing them, but Simon also relies on the cut-proof and waterproof trousers and lightweight jackets, whether working in the workshop or outdoors.

When poppy met stihl ear protection

When Poppy Met Stihl: Ear Protection

Ear protection is an essential….at least for Simon! Stihl have a great range of gloves, safety glasses, head and ear protection.  Notice the cap too. According to Poppy, Stihl clothing is also for leisure time and not just work!

Poppy met stihl helmet and ear protection

When Poppy Met Stihl: Safety Helmet

Poppy’s final photo features another essential piece of protection. Did you spot it? That’s right, a blanket – an essential for tree carving trips.
OK, not really!
As you may have seen in our blogs about the Marbury Lady, the Spirit of Ecstasy, or the Giant Hand of Vrnwy, Simon often has to climb some fairly tall scaffolding. When he has projects that need him to work at height, he always wears his Stihl safety helmet. Safety is incredibly important, and their helmets have all kinds of ‘add ons’ or design features specific to this kind of work. These range from integrated ear or face protection to vents, or lightweight versions.

If you work with machinery, heights, or just in any area of your work, we do encourage you to follow safety protocols. It may be uncomfortable initially, but optimum health and safety is always worth the initial discomfort.

Poppy, Simon, Liz O'Rourke with the Game of Thrones eggs and casket

Poppy Stihl!

For those who enjoyed our blog featuring Poppy, she actually has her own Instagram account. You can follow her at www.instagram.com/poppystihl. If you come out and see us at the workshop, a show, or an appearance of Hemlock the Dragon, you may also meet her in person as she often comes along. She may be a bit trickier to spot though, as she isn’t always wearing ‘Stihl Orange’!

We hope you enjoyed something slightly different, and (hopefully) more ‘fun’ this week.
We leave you with this video from Simon, sharing a little more about his partnership with Stihl.

Stay safe, stay well, and stay connected.

 

A Bespoke Tawny Owl Sculpture

A Bespoke Tawny Owl Sculpture 150 150 Simon O'Rourke

One of the things that Simon was known for early on in his career was carving owls! Although he prefers human form, his attention to form, story, structure and detail mean he has created some incredible owls over the years. Some of them have become famous in their own right too, such a Ruby the owl. She’s part of Meadow Park sculpture trail on the Wirral and was actually stolen and – amazingly – returned! This week we look at Simon’s most recent example: a bespoke tawny owl sculpture that will be installed in Pocklington, Yorkshire.

A bespoke tawny owl by Simon O'Rourke for the town of Pocklington, Yorks

The Commission

This bespoke tawny owl is for public display in the town of Pocklington. When it was originally commissioned, the clients came to Simon with an existing Horse Chestnut stump. Their hope was that the owl could be carved from that. However, Simon advised them that it would be unsuitable as Horse Chestnut rots quickly. Instead, they decided to have the owl carved from oak, and to mount it upon the original stump.

To create the owl, Simon paid careful attention to the shape, size and proportions of the owl. He also imitated perfectly the way the feathers fall, and how the lengths and appearance vary on the different body parts. We can see clearly the fluffier chest and legs compared with the sleek, defined tails and wings.

bespoke tawny owl and original by Simon O'Rourke
As the Sculpture Ages….

Wood changes over the years. That means a commission such as this bespoke tawny owl will weather and gradually change in appearance. When Simon creates a sculpture, he takes into account how it will crack in future. This is important, so he can carve in a way that although the appearance will change, the structure will still be sound.
The face below is a perfect example of this. It has small cracks appearing but retains its structure and shape – and will for decades to come!

Face by Simon O'Rourke

Changing and Protecting Colour

Another aspect of this changing appearance that Simon considers, is the colour. All wood will change colour as it ages and is bleached by the sun. Once that happens, the only way to get the colour back is to sand it or re-finish the surface. Long-lasting woods such as oak and sweet chestnut weather nicely and last well without any finish. This means this bespoke tawny owl sculpture didn’t need any additional treatment.

For some sculptures, the bleaching and aging adds to the beauty and aesthetic of the sculpture. Maybe it is part of a forest trail and it needs to blend in with the environment. In other cases, the nature or setting of the sculpture lends itself to the aging process. The Angel at the Pool of Bethesda (included in our review of the decade) is a perfect example of this. It is based on an old painting, and sits in a Biddulph Old Hall, a historic property. The sculpture was left untreated so it would bleach naturally in the sun, and age to fit in with its environment. We love the way it looks two years on….

Angel at the pool of bethesda by simon o'rourke at biddulph old hall

Angel at the pool of bethesda by simon o'rourke at biddulph old hall

Recommended Treatment

The bespoke tawny owl sculpture is made of oak, so didn’t need treatment. However, if you do want to retain colour of the original sculpture, decking oil applied every 4 months will do this. It acts mostly as a weather proofer, allowing the sculpture to keep its original colour. It also offers UV protection, and has an additional bonus of containing mould inhibitors too. Unlike most other weatherproofing options, the oil is a good choice as it allows the wood to breathe. Over the years Simon has number of different brands . While he doesn’t necessarily have a favourite, he always buys from  www.restexpress.co.uk and recommends them as a supplier.

In addition, if the wood needs an initial treatment of wood preserver, he applies that before the oil. The preserver soaks in like water and prevents surface growth of mould and fungi.

barn owl by simon o'rourke

A Sculpture for Life!

Whenever Simon creates a sculpture, he considers the future appearance and carves and treats so it will last. However, if you do have damage or something that needs re-working, Simon is available for repair, upkeep and restoration. Contact him on [email protected] whether to talk about upkeep of a current sculpture, or a new commission.

Simon O'Rourke creating an oak maiden using Stihl battery chainsaw

Creating an Oak Maiden

Creating an Oak Maiden 720 960 Simon O'Rourke

There are two approaches to tree carving that Simon practices. The first is to design the piece, and then find timber suitable for the project. The three footballers that you may remember from last year are an example of this. In fact,  as you may remember from the Queen of the South Legends blog, completion was actually delayed because of sourcing timber after the original piece had a split.
The other approach is carving a standing stump. This means letting the tree dictate the design rather than the design dictate the timber. Sometimes the shape inspires the subject. Other times, it means making changes to the design along the way to accommodate the shape, size, twists turns and any surprises once the bark is stripped and Simon begins cutting. This was certainly the case with Simon’s latest project: creating an Oak Maiden.

Simon O'Rourke creating an oak maiden using Stihl battery chainsaw

 

Creating an Oak Maiden: The initial concept

This Oak Maiden looks incredible! However, she wasn’t actually what Simon had planned! The client who commissioned the hydra rising out of the ground, had asked Simon to look at another tree. There was an oak that had died and she wondered if it would make a good sculpture. When Simon first saw it, he could see female form. He also noticed the many branches at the top. Rather than cut these off, he imagined them to be a key part of the sculpture. And so, his initial concept was Medusa. The trunk could be transformed into a striking female form, and Simon imagined those undulating branches would make perfect ‘snake hair’. As a Greek mythological character, she would be a beautiful compliment too, to The Hydra. The client agreed, and Simon arrived at the start of last week expecting to create another Greek myth…..

Simon o'Rourke in the process of creating an oak maiden

Day one of creating an oak maiden. It’s easy to see why those branches suggested Medusa!

Creating an Oak Maiden: Change of plan!

Just as happened with The Hydra though (originally it was going to be a flock of birds or pterodactyls rising from the ground), once he began work, Simon realised that his original design wasn’t going to work. The branches at the top simply weren’t right, and he knew it would be better not to try and make them into snakes.

This flexibility and ability to respond to the timber is part of what makes Simon a great artist. Adapting his design to the work with the shape and features of the timber means creates sculptures which aren’t contrived. In fact, one comment on his Marbury Lady sculpture was that it seemed like she was always there in the timber, and Simon simply uncovered her.

An Oak Maiden by Simon O'Rourke

Creating an Oak Maiden: Adapting the Design

Adapting the design to work with the branches was an aesthetic decision. However, sometimes Simon also has to make changes because of practical reasons. This isn’t just about what he can see either. He also has to take into account what will happen to the timber as it ages. What may seem a small crack at the time for example, could cause massive damage to a sculpture later if he isn’t wise.

Another change in creating this oak maiden was because of one of these practical considerations. When we look at the oak maiden, her ‘crown’ appears bulkier to the left. In his ‘ideal’, Simon would have reduced some of that wood to create a more elegant or slimline look. However, there is a large amount of weight in the branches above it. This meant Simon faced the choice of losing some of that weight (and some of the rustic, organic, woodland feel to the character), or adapting his initial vision.

Simon O'Rourke Oak Maiden with moon

Close up showing the bulk of wood on the left

Creating an Oak Maiden: More Changes!

Simon chose to leave the wood on the left side of the face, to support the weight above it, and again demonstrated his skill at using challenges to create something even better! The extra wood became this fantastically textured crown instead, rather than being unnecessary bulk, it is now part of the story that Simon tells through sculpture. The weight and size is suggestive of a crown that now seems to enhance the status of this Oak Maiden. It reflects the strength and majesty of an oak tree, and conjures up an image of this Oak Maiden being a princess or queen among the woodland characters.

simon o'rourke in the process of creating an oak maiden with the stihl MS400

This photo gives a sense of the scale of the sculpture

Creating an Oak Maiden: Sculpting Human Form

One of the things that makes Simon’s human form sculptures so exceptional, is his attention to story and structure and how they create movement. We saw this with the Marbury Lady and Prestatyn Hiker that you may have spotted on Facebook or Instagram. The clothes in both showed the lines and wrinkles associated with being worn by a living, moving being rather than being hung static in a wardrobe. In this case particularly paid attention to the shape of the form underneath the cloth. For example, the skeleton, muscles, shape, size and position of the subject. Similarly to the Marbury lady, he also left raised wrinkles to imply a very thin material which skims the body.

Body of the Oak Maiden by Simon O'Rourke

Creating an Oak Maiden: The Tools!

It sometimes seems amazing to think that suck a beautiful thing can be created by something as destructive as a chainsaw! In the case of the Oak Maiden, Simon relied a lot on the Stihl MS400. Stihl’s MS400 is the first chainsaw  to make the change to a magnesium piston. This, and it’s “impressive power-to-weight ratio of 1.45 kilograms per kilowatt”, has made it much more ‘punchy’. Combined with the 20 inch Tsumara carving bar, Simon found  it worked really nicely for controlled shaping.
The Saburrtooth bits have fast become an essential on the job too. These are largely what Simon used for refining the face and hands, creating small areas like the eyes, and adding texture. Some of his favourites are the conical burr, and the large coarse flame bit. The small eye bit also helped create sharper lines and bring more expression to the eyes.

Face of an oak maiden by simon o'rourke

This nymph (or as we’ve been calling her, ‘Oak Maiden’) has definitely been a hit on social media. Most importantly though, the client loves her! The Oak Maiden may not have been the original plan, but Simon has created something even better and truly lovely, restoring life to this dead oak.

If you have a dead tree on your property, why not chat with Simon to see if he can imagine something in it? He loves to bring life back to dead or damaged trees, and can create you something completely unique. Contact him on [email protected] to talk about ideas and quotes.

 

Simon O'Rourke carving a fairy

On Working with Acton Health and Safety

On Working with Acton Health and Safety 720 960 Simon O'Rourke

One of our goals for this year, is to share a few blogs that take you behind-the-scenes, to give you a better idea of ‘life behind the sculpture’. A few weeks ago we shared a blog about working alongside Treetech as part of that. This week we want to introduce you to another company who are invaluable to us, and share a little about working with Acton Health and Safety.
As you’ll know if you read our Blood Donor Day blog about safety with chainsaws, you’ll know that keeping our whole team safe is hugely important to us. Many people are put off when they hear ‘health and safety’. It’s often seen as something boring, or full of petty limitations. It’s SO important though, and we hope you’ll stick with us, and enjoy finding out more about our experience working with Acton Health and Safety…..

Acton Health and Safety logo

About Acton Health and Safety

Acton Health and Safety are a Wrexham based company. They provide a MASSIVE range of services in the area of ‘health and safety’. This ranges from assessments of workplaces to helping companies stay compliant with legislation, through to providing a HUGE range of training and equipping. Again, the list of what they provide is extremely comprehensive and incorporates things like food safety through to fire training, electrical safety, fork lift truck operating procedures, and – you guessed it – chainsaw licensing!

Simon O'Rourke adding detail to an ice carving dragon, Wrexham 2019

Working with the Manpa Angle Grinder. Acton Health and Safety help us keep our work with power tools as safe as possible.

How We Started Working with Acton Health and Safety

We first met Martin from from Acton Health and Safety about four years ago. Over the next few months we then crossed paths with him again at various networking events. Through these meetings, we discovered the company offers a free initial site visit, and invited him to the workshop. In that first visit he reviewed all our health and safety, and fire safety policies and procedures. He also asked questions, and observed our operating practices. We found Martin to be a genuinely lovely man who cares about both his work and his clients, and knew we could really benefit from working with Acton Health and Safety. One of the things we found particularly helpful was that they don’t just complete a review and give a list of things to improve. Rather, as a company, they are then also able to help us fulfill those requirements.

A view of Simon O'Rourke's tree carving workshop. Working with Acton Health and Safety has kept us compliant.

The workshop is a place with lots of potential dangers, but Acton Health and Safety help us minimise those risks

Our Ongoing Relationship with Acton Health and Safety

We have now been clients of Acton Health and Safety Fire Safety for four years. They ensure all policies and procedures are up to date, and our health and safety is in line with current regulations. They help us keep staff and all visitors safe (both on and off site) and assist with risk assessments. This includes giving us guidance for daily, weekly and monthly checks.
This has been SO important to us as a company. We’ve found over the years that having good health and safety practices is about much more than just checking boxes. Knowing we have the best practice possible gives us greater peace of mind. This enables us all to enjoy what we are doing – as well as obviously keeping us safe and healthy!

The Lady of Marbury sculpture by Simon O'Rourke in process

At work on a sculpture. Acton help us ensure all our site work is the safest it can be for Simon and the public.

Mutual Clients!

One of the things we like about working with Acton Health and Safety, is ongoing mutual relationship and connection. Since working with us, Martin has been around the workshop a lot. It meant he was able to see some projects from drawing stage to completion and says he found it “fascinating”. As a result, he has even asked Simon to create myself a few special things for birthday surprises!

“We have a penguin in our garden at home which was a present for my wife… to this day it looks as good as it did when Simon delivered it and secured it down. You need an incredible eye for detail to do the work Simon and Liz do, and they do the work to the highest level whilst obviously ensure all the safety aspects of their works are adhered too!”

Penguin by Simon O'Rourke created for martin working with acton health and safety

 

A Word from Acton Health and Safety

When we were preparing to write this blog, we asked Martin a few questions. We wanted to know what motivates him to work in a field most people avoid. His answer perfectly expresses why we enjoy working with them, and the experience we have. So, we thought in closing, we would let Martin speak for himself:

“When you talk to someone about health and safety they shy away about it, but Acton are not here to scare anyone.  We are here to provide advice, guidance and help build with the client the best environment for the workplace and staff. Our main priority is our clients and to make sure they are confident with the regulations and know the procedures in place. We do this job as we enjoy helping others and making sure everyone is safe.”

Simon O'Rourke carving a fairy

Wearing the right protective clothing is an important part of staying safe!

Final Thoughts

We know health and safety regulations can be a minefield. Having right procedures and policies in place is SO important though. It’s how we stay safe, and how we keep our visitors or the public safe. It creates a more pleasant and productive work environment too when we know we are working within the framework of best heath and safety practice. We love that it means that as clients you can also have peace of mind when Simon is working at your house or place of work too!

If you find compliance overwhelming, we encourage you to connect with Acton Health and Safety. If not them, a company like them. And don’t just take our word for it. You can visit https://www.actonhealthandsafety.co.uk/ and see testimonials from us and other clients too! We’re thankful for our experiences working with Acton Health and Safety, and believe you will be too.

bespoke sign for the Joshua Tree centre by simon o'rourke

A Bespoke Sign for The Joshua Tree

A Bespoke Sign for The Joshua Tree 600 450 Simon O'Rourke

Many of you will have read in Simon’s biography that his is in illustration. Tree carving started for him while he was working for Acorn as a tree surgeon while building up his portfolio. He realised he could create beautiful things with the power tools he was using, and the rest is history!
That means not only is he able to create amazing sculptures, but he also has a portfolio of beautiful wall hangings and plaques. You might remember some of them from our Pet Portraits blog.
This week we want to share a recent commission with you which was for an entrance sign to a special place: Simon’s bespoke sign for The Joshua Tree for their new centre in Sandiway, Cheshire.

Wall hangings by Simon O'Rourke

Examples of Simon’s wall hangings at the gallery. Excuse the tinsel, this was taken during a Christmas fundraiser!

The Joshua Tree

Lynda and David Hill founded The Joshua Tree in 2006, after their son was diagnosed with leukaemia. They discovered a distinct lack in support services for all family members during the traumatic experience of childhood cancer, and wanted to provide something for other families in their situation.

Their goal is to support the whole family, from diagnosis, through treatment and beyond. They especially recognise that post-treatment can be a challenging time,  as families have to adapt to a ‘new normal’, but many of the support services that are in place during treatment,  have come to an end.  The Joshua Tree offers support, and help bridge the gap when that safety net of treatment ends.

Even though it’s only 14 years since its inception, The Joshua Tree have received over 170 referrals! They estimate that in that time they delivered over 1700 family interactions delivered to families affected by childhood cancers.

Architect’s impression of The Joshua Tree’s new centre

The Joshua Tree Support Centre

One of the charity’s undertakings is a new support centre in Sandiway. It’s still under construction, but even a quick look at their blog shows it is going to be an amazing facility. As part of the finishing touches, Simon was commissioned to create a bespoke sign for The Joshua Tree centre.

The goal of the centre is to provide a safe and relaxing environment for families. It will cater for children of all ages, from toddlers to teens! It will have activity room, counselling suites, soft play, sensory equipment, as well as games room, office  accommodation, outdoor play and landscaped gardens. It’s definitely a special project, and we know it will make an incredible difference to so many.

The Joshua Tree Support Centre under construction. Simon O'Rourke created a bespoke sign for the Joshua Tree.

The centre under construction

Simon’s Contribution.

The commission for a bespoke sign for the Joshua Tree Centre came after one of the staff noticed Simon’s work online. It seemed a good fit from the beginning. Not only did they like his work, but as The Joshua Tree supports families in Wales, it seemed fitting to commission  a ‘local’ artist.

Simon made the sign of a lovely warm, cedar. His choice of timber has meant the placing of the logo still allows for some of the lovely knots and markings to come through, so it still has an organic feel. The building is also clad in cedar, so it will be a beautiful compliment to a great facility.

bespoke sign for the Joshua Tree centre by simon o'rourke

Simon and Paul handing over the finished sign.

Simon is available for commissions of pet portraits, signs and wall hangings.

Email [email protected] to discuss the details.

The Great Resc-yew (rescue): Two Towers and a Dragon

The Great Resc-yew (rescue): Two Towers and a Dragon 150 150 Simon O'Rourke

Two Towers and a dragon.
Sorry, nothing to do with the movie! Although if you enjoy Tolkien, you could read our blog about Simon’s Lord of the Rings sculpture.
Rather these two towers and a dragon were straight from Simon’s imagination. As well as telling a story, they are actually also a happy ending in themselves! Read on to find out more about ‘the great resc-yew’…

Two towers and a dragon by Simon O'Rourke

The Resc-Yew Plan

These stunning sculptures began their life as yew trees (now the ‘rescue – rescyew puns make sense!) which had become problematic. Yew is a fascinating and beautiful wood which grows in all kinds of shapes and patterns. They are some of the oldest trees in the country, are great for making all kinds of things. This ranges from carving household objects and art to furniture. Most famously though, they have the reputation of making the best long bows! However, that wild beauty can sometimes cause problems for the landowners.
In this case, they were growing too close to the house.

Initially, the owners had the tops removed, but it turned out that wasn’t going to be a good long-term solution. Rather than remove them completely, they decided to turn them into a different kind of beautiful – a Simon O’Rourke sculpture! All projects have their points of fun and excitement, but one of the things Simon enjoys about this kind of commission is the sense of giving life and purpose back to something that had either died, was damaged, or could no longer remain as it was. Even better when it’s something as fun and unique as this fairytale sculpture!

Incidentally, if you have trees which are becoming problematic, read our blog about Treetech, a tree surgeon we work with and recommend to give you an evaluation!

The dragon from Two Towers and a Dragon by Simon O'Rourke

Creating the Sculptures

After chatting with the owners about what they would like, Simon went to work, employing not only his skill, but his creativity and imagination to create this scene from a story Tolkien or C S Lewis would be proud of!

Simon kept some of the bark to allow the trees to blend in more with the rest of the garden. This also adds age and authenticity to the towers, as if they are something from an long-ago, far away adventure. He created the initial shapes using Stihl chainsaws, then used his Manpa angle grinders and chainsaw bars, and Saburrtooth bits to create the details and added texture. The beautiful natural patterns within the yew combined with Simon’s deeper cuts that mark the stone and tiles, to create the feel of ancient stone towers that have been weathered over the years.

The Two Towers from Two towers and a dragon by simon o'rourke

Choose Your Own Adventure

One of the fun things about a sculpture like this, is it not only looks great, but sparks the imagination. This is something that is important to Simon in every sculpture he creates, and even shares in his biography that he wants “people to feel like they’ve experienced part of a story”

In this story, with the two towers and a dragon, the castle is under threat from the dragon. As we look at him, we see he is quietly watching, formulating his plan, and resting his wings, which although relaxed at this moment, are clearly powerful and large.

But what happens next?

Simon has set the scene and created a stunning piece of art, but the rest is up to you.
Can the towers withstand the attack?
Who or what is within them to attract the dragon?
Who will be victorious and how?

We think it would be wonderful to spend a summer’s evening in this garden – perhaps after a BBQ with a glass of your favourite drink in hand – inviting family and friends to tell the rest of the story. What do you think happens next? How would you end this great resc-yew story? Why not comment below and let us know!

As always, if you feel inspired by this week’s featured carving, you can talk to Simon about commissioning something unique for your home and garden. Contact us on [email protected].

Our Affiliates: Working with Treetech

Our Affiliates: Working with Treetech 150 150 Simon O'Rourke

A while ago we shared this blog about the importance of teamwork. We rely on good teamwork in all kinds of ways: our employees, sponsors, affiliates and contractors, and we’re thankful to work alongside so many great people. So, this week, while Simon is working on a longer project we can’t share yet (but you can get a sneak peak on this Facebook post), we want to introduce you to one of the companies we partner with: Treetech.
We have been working with Treetech for around five years now, and consider them an essential part of our team. For those who feel the name is familiar, that’s because they even sponsored our Christmas Ice Carving this year.

Simon o'Rourke Working with Treetech

About Treetech

Treetech is a Wrexham based tree surgery business run by Shaine Bailey. Although he is based in Wrexham, he operates throughout the North Wales, North West and Midlands areas.

Shaine first took an interest in tree surgery when he’d watch his father use chainsaws round the garden for firewood. After starting out in landscaping and gardening, he began to take a particular interest in trees. After a family member taking that interest further, he took steps towards becoming a tree surgeon.

He now has over ten years experience in the business, and provides an excellent service, as you can tell from these reviews.

They offer a massive range of services from advice, to full commercial site clearance, and everything in between. If you have trees in your garden that are beginning to block light, have been damaged by winter storms or are diseased, we fully recommend Treetech to you.

Working with treetech to deliver sculptures

Shaine delivering various pieces including the Dragon Throne for RAF Valley and the Queen of the South Footballers.

Working with Treetech

As we said, Simon has been working with Treetech for around five years now, and they compliment each other well. As a tree surgeon, Shaine is able to source wood for Simon. He is also invaluable to us as he collects timber, and helps with delivering and installing Simon’s work. In fact, it’s Shaine’s truck you see in many of our photos of sculptures being transported.

We don’t just recommend Treetech as a competent service provider either. Shaine is a hard worker and a real team player as you can see from this video of us loading the Dragon Throne for delivery.

Contacting Treetech

If you live in North Wales, the North West or Midlands and are in need of Treetech’s service, you can contact them on [email protected], calling 07759 128232 or through www.facebook.com/shaine.baileyi9/

 

Into the 20’s – A Review of the Decade

Into the 20’s – A Review of the Decade 150 150 Simon O'Rourke

As we start a new decade, we’ve been reflecting on the many changes that have happened personally and professionally over the last ten years. Professionally, it’s been a great decade with some fantastic opportunities and commissions. We’ve also met some amazing people and seen some wonderful places along the way. Before we move forward into the 20’s, we thought we would bring you our ‘review of the decade’. And, as we do, let us wish you a Happy New Year from all at Tree Carving.

Simon O'Rourke Game of Thrones Egg Carrier carving

Simon and Liz O’Rourke wish you a happy new year (and decade) on behalf of the Tree Carving team.

Review of the Decade: 2010

As we looked back, we could definitely see we didn’t use social media as much! And the technology we used definitely didn’t produce the kind of photos and videos we do today! But here is a look back at two competition pieces from that year, both taking second place. Neptune from the English Open Chainsaw competition, and a traditional miner from the Huskycup.
A quick glimpse at Simon’s awards shows that this was a good decade for competition, placing in most things he entered and winning seven awards. However, when it comes to competitions Simon says:
“Competitive sculpture has taught me a lot about completing work to a deadline. I have competed all over the world and although I have placed highly in many events, the most important thing to me is being happy with my own work.”

Neptune by Simon O'Rourke as featured in his review of the decade

Simon O'Rourke second place huskycup 2010

Review of the Decade: 2011

Two of the projects we chose as highlights from 2011 are The Giant Hand of Vrynwy, and the Somerset Tree.

At 50′ tall, it was no wonder the hand caught the attention of the local press, as you can see in the article by The Leader newspaper. Simon’s inspiration for the hand came from the name for the woodland area, which made reference to giants. Creating something on this scale reminded Simon how small we are compared to some of the living organisms on this planet. He described the experience as being very humbling!

Giant hand by Simon O'Rourke

The next project although tall still, was a little smaller in scale! Simon was commissioned by the Museum of Somerset to create this stunning tree for their new museum. Sourced from local wood, it stands proudly in the museum where it tells some of the area’s 400 million year history.

Tree of Somerset by Simon O'Rourke

Review of the decade: Tree of Somerset by Simon O'Rourke

Review of the Decade: 2012

Another Huskycup entry! This time, the sculpture of “Christian and Mary”. Simon worked on this piece as part of ‘Team Europe’ with Tommy Craggs and Michael Tamoszus. They placed fourth overall, with some tough competition from a great bunch of talented artists. As we had a quick glimpse back at the Facebook album of the event it was lovely to be reminded of the support, encouragement and lovely comments.

Christian & Martha Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

Review of the decade: Christian & Martha Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

fourth place Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

Review of the Decade: 2013

For our 2013 highlight, we chose something a little different. During that year Simon created this incredible Alice in Wonderland booth for Steak of the Art in Bristol. Their vision is for the restaurant to be an ever-changing art gallery that compliments their delicious menu. As you can see from the photos in the case study Simon wrote, his booth more than fits their vision. Every single character is its own work of art, and with so much to see, although the piece doesn’t change, there is something new to notice each time you sit within it. Here we get a reflection of the changing technology too, with this timelapse video of its making!

Alice in Wonderland booth at Steak of the Art by Simon O'Rourke (a review of the decade)

Alice in Wonderland booth by Simon O'Rourke, Steak of the Art

Alice in Wonderland booth by Simon O'Rourke, Steak of the Art

Review of the Decade: 2014

2014 saw us receive a lot of publicity for two ‘guardians’.

The first was created for the ‘Pawtraits‘ series by Maria Slough, and was actually named ‘The Guardian‘. The series featured people photographed alongside animals that had impacted their lives, and Simon was brought in to create a piece to be used for the portrait of Virginia McKenna. Understandably, the actress wasn’t too keen on reclining on a real lion – hence Simon stepping in with The Guardian! As McKenna was so impressed with his work, Simon was later commissioned to sculpt a lion cub for the Born Free Foundation charity auction, a charity McKenna established. As well as the photos below, you can click HERE to see a timelapse of The Guardian being made.

 

The Guardian by Simon O'Rourke

Maria Slough Pawtrait Virginia McKenna featuring lion by Simon O'Rourke

Photograph copyright of Maria Slough from the Pawtraits Series

The other ‘guardian’ created by Simon that year is just as iconic. Phil and Leah from Wahoo Group wanted to harness the power of social media and do something novel to help sell their home. Thinking completely outside of the box (no baked cookies here!) they commissioned a sculpture of…..Batman!

The caped crusader sat on top of their home where it gained attention from both local and global news outlets, and helped the couple find tenants for their property.

Wooden Batman carving by Simon O'Rourke

Wooden Batman carving by Simon O'Rourke

Batman by Simon O'Rourke and St Giles Church Wrexham

As one of Simon’s strengths is Human Form, we also couldn’t resist throwing in this sculpture of Scottish explorer, Mungo Park. He was commissioned for a pub in the explorer’s hometown of Peebles, and sits on this bench for passers by to enjoy.

Review of the decade 2014 Mungo Park

 

 

Review of the decade 2014 Mungo Park

Review of the Decade: 2015

2015 was the year when Simon won the English Open Chainsaw Competition with Hemlock the Dragon.

Since then Hemlock has made countless appearances around the country, including at a wedding! Hemlock has recently had some repair work on the wings, and is ready to meet the public again. If you are interested in hiring Hemlock for your event, just email us on [email protected]

Hemlock the Dragon English Open Chainsaw Competition 2015 by Simon O'Rourke

Review of the Decade: 2016

2016’s highlight is another Huskycup Flashback: Viking Raid.

As well as the Viking Raid Case Study Simon wrote, we also have a blog about Viking Raid for those who want to know more. As we mentioned in our Huskycup 2019 blog, 2016 was actually the last year Huskycup was a competition. It meant Simon was the last ever Huskycup champion, as Viking Raid took first place. What a way to end the competition for him! Although it is no longer a competition, Simon continues to participate, and it is something of a highlight each year.

In 2016 Simon also became an affiliate of Olfi. We love their action cameras, and how they’ve transformed what we’re able to share with you through timelapse videos. Find out more in our Olfi blog!

Viking Raid at Huskycup 2016 by Simon o'Rourke

 

 

Viking Raid at Huskycup 2016 by Simon o'Rourke

 

Review of the Decade: 2017

2017’s highlight is from Liverpool. Simon created a tribute to The Beatles by carving life size figures of the Fab Four live along the dockside over a weekend. You can read more about the event in our Global Beatles Day Blog, and keep scrolling to enjoy our flashback photos and video.

2017 was also the year Simon began being sponsored by Stihl. Not only do they manufacture quality equipment, but it was something of a ‘full circle’ for Si, as his very first chainsaw experience was using Stihl equipment.

 

Beatles at the Liverpool dockside by Simon O'Rourke

 

Nearly done!!

Posted by Simon O'Rourke – Tree Carving on Monday, 28 August 2017

 Review of the Decade: 2018

As Simon says in his case study about the Spirit of Ecstasy, this was one of his most challenging sculptures to date.
You may remember from our Spirit of Ecstasy blog, that Simon recreated the Rolls Royce icon for an enthusiast to give new life and purpose to a beautiful oak tree which had died. Despite the challenges, the finished piece was faithful to the Rolls Royce concept, graceful and simply stunning. We hope you enjoy the finished result as much as we (and most importantly, the client!) did.

Spirit of Ecstasy by Simon O'Rourke

 

 

Review of the Decade: 2019

In our new year blog at the start of last year, we told you 2019 would be our ‘year of the dragon’. We weren’t wrong! Over the year Simon created seven new dragon-related carvings, including an ice dragon in our local town.
It all started off with The Dragon of Bethesda. It sits in an arboretum in North Wales after the landowner commissioned Simon to create something spectacular from a fallen tree. Y Ddraig Derw was featured in national media, and we are still overwhelmed by the encouraging response from so many people to the piece.

Dragon of Bethesda by Simon O'Rourke

 

Our other dragon highlight from the year, is this stunning casket created for HBO’s Game of Thrones.

Game of Thrones egg props Simon O'Rourke

Simon was commissioned by HBO as part of a wider project where artists re-imagined original props from the show. He received these beautiful dragon eggs, and created the casket for them to sit in. You can remind yourself of the whole project and process in our Game of Thrones blog.

Again, we were amazed, thankful and VERY encouraged by all the positive comments we received.

This is also the year Simon became an affiliate for ManpaTools. Their angle grinders especially have taken some of his texture and detail to a whole new level.

Simon O'Rourke casket Game of Thrones Season Eight

Moving into 2020, Simon has also become an affiliate for Saburrtooth. With quality tools and equipment from Stihl, Manpa and Saburr, Simon’s talent and creativity, and the continued support of all our amazing clients and co-workers, we look forward to what the next decade – the roaring 20’s – will hold.

We hope you enjoyed our Review of the Decade. We definitely loved seeing some of these pieces afresh as we looked back.
As always, if you have a project in mind, email us on [email protected]