Sculpture

Capenhurst Woodland Scene

Capenhurst Woodland Scene 150 150 Simon O'Rourke
If you saw this Facebook post back in January, you’ll know that Simon’s first completed project of this year was the Capenhurst Woodland Scene. This sculpture was the idea of one person, but was made possible by community spirit and co-operation. It’s a lovely story, so we wanted to share it with you! Thanks to Gary Wright, for his contribution to today’s blog.
Work in Progess: the Capenhurst Woodland Scene by Simon O'Rourke after Day One

Work in Progess: the Capenhurst Woodland Scene after Day One

The Idea Behind the Carve
A few of the locals in Capenhurst village had been making improvements to the village over the last couple of years to benefit the community. Some of these were small changes, but really make a difference the appearance of the village, and subsequently to people’s mood and mindset. The villagers planted daffodil  bulbs in the grass verges, and installed planters and a bug hotel.
These changes may have been small, but they didn’t go unnoticed. The village entered the ‘Britain in Bloom’ competition in 2019 for the first time. To their amazement and shock, they received a bronze award for their efforts!
Local businessman Gary Wright thought it would be nice to install a focal point on the village green for all to see as they pass through the village. He had recently recovered from illness and wanted to create something to make people smile when passing. Capenhurst is a rural spot with a good array of wildlife, so Gary wanted something to represent this.
Simon has a wide array of sculptures in his wildlife portfolio. These range from isolated sculptures of individual animals, to scenes within a single piece of timber, or even whole sculpture trails with a story and educational purpose. Gary had followed Simon on social media after seeing his work at Erddig National Trust, and thought a wildlife sculpture by Simon would look fantastic.
And so, the idea for the Capenhurst Woodland Scene was born.
Finshed Capenhurst Woodland Scene by Simon O'Rourke
Making it Happen….

A commission like this which is for the community rather than a private home or business, doesn’t happen overnight. There’s always funding to find, and often a community will need to get permission to erect something new. And then there’s the decision about what it actually looks like! Gary began chatting with Simon about design ideas and costs, and went about making the sculpture happen….

In this case, Gary initially set up a Go Fund Me page to try and raise the money needed. Neighbours began to donate, and funds were slowly building up. However, it turned out Gary wasn’t the only one to think this sculpture would be a good idea. He spoke with Neil Fagan from the neighbouring local major company Urenco, and was amazed to hear Urenco would fund the whole sculpture!
Other companies soon got involved too. Wesley Simpson from Unique Pavings and Landscapes in neighbouring Ledsham agreed to supply and install the concrete footings required for the sculpture. Overall, Gary was overwhelmed with the positive response he received.

Side View of Capenhurst Woodland Scene by Simon O'Rourke

A side view reveals some of the animals ‘hidden’ within the sculpture

Moving Ahead with the Sculpture

Simon and Gary had agreed on a single piece of timber that would initially appear to be a sculpture of an owl, but would actually be an entire woodland scene. Those who know Simon’s work will have seen this in many other examples. Within the ‘base’ or ‘trunk’ Simon creates other animals, each one telling its own unique story, as well as fitting into a bigger scene.

With this decided and funds in place, Gary agreed a location with the community. Again, for anybody thinking of commissioning a sculpture for their own locale, please don’t skip the permissions! In this case, the parish council and the landowner Urenco approved the location.

Simon created the sculpture on-site in Capenhurst village. As always, he attracted many spectators! A local taxi driver stopped to watch and said that he couldn’t miss watching this being created. He said he’d tell people for years that he had watched it being carved!
Other neighbours took photographs and stopped to talk with Simon. He was even asked to look at some other jobs in the area!

Gary reports that the response to the sculpture has been fantastic:

“People comment on it continuously and it has been visited by the local schoolchildren. It will remain a treasured focal point in the village for years to come.”
Close up of woodland scene by simon o'rourke

A close up of the owl

What a beautiful sculpture, and what a great story. It’s inspiring to see how one person’s initiative combined with community spirit can come together to create something beautiful.
If you would like to commission Simon for a project in your community, contact us on [email protected] to talk about the details.

The Great Resc-yew (rescue): Two Towers and a Dragon

The Great Resc-yew (rescue): Two Towers and a Dragon 150 150 Simon O'Rourke

Two Towers and a dragon.
Sorry, nothing to do with the movie! Although if you enjoy Tolkien, you could read our blog about Simon’s Lord of the Rings sculpture.
Rather these two towers and a dragon were straight from Simon’s imagination. As well as telling a story, they are actually also a happy ending in themselves! Read on to find out more about ‘the great resc-yew’…

Two towers and a dragon by Simon O'Rourke

The Resc-Yew Plan

These stunning sculptures began their life as yew trees (now the ‘rescue – rescyew puns make sense!) which had become problematic. Yew is a fascinating and beautiful wood which grows in all kinds of shapes and patterns. They are some of the oldest trees in the country, are great for making all kinds of things. This ranges from carving household objects and art to furniture. Most famously though, they have the reputation of making the best long bows! However, that wild beauty can sometimes cause problems for the landowners.
In this case, they were growing too close to the house.

Initially, the owners had the tops removed, but it turned out that wasn’t going to be a good long-term solution. Rather than remove them completely, they decided to turn them into a different kind of beautiful – a Simon O’Rourke sculpture! All projects have their points of fun and excitement, but one of the things Simon enjoys about this kind of commission is the sense of giving life and purpose back to something that had either died, was damaged, or could no longer remain as it was. Even better when it’s something as fun and unique as this fairytale sculpture!

Incidentally, if you have trees which are becoming problematic, read our blog about Treetech, a tree surgeon we work with and recommend to give you an evaluation!

The dragon from Two Towers and a Dragon by Simon O'Rourke

Creating the Sculptures

After chatting with the owners about what they would like, Simon went to work, employing not only his skill, but his creativity and imagination to create this scene from a story Tolkien or C S Lewis would be proud of!

Simon kept some of the bark to allow the trees to blend in more with the rest of the garden. This also adds age and authenticity to the towers, as if they are something from an long-ago, far away adventure. He created the initial shapes using Stihl chainsaws, then used his Manpa angle grinders and chainsaw bars, and Saburrtooth bits to create the details and added texture. The beautiful natural patterns within the yew combined with Simon’s deeper cuts that mark the stone and tiles, to create the feel of ancient stone towers that have been weathered over the years.

The Two Towers from Two towers and a dragon by simon o'rourke

Choose Your Own Adventure

One of the fun things about a sculpture like this, is it not only looks great, but sparks the imagination. This is something that is important to Simon in every sculpture he creates, and even shares in his biography that he wants “people to feel like they’ve experienced part of a story”

In this story, with the two towers and a dragon, the castle is under threat from the dragon. As we look at him, we see he is quietly watching, formulating his plan, and resting his wings, which although relaxed at this moment, are clearly powerful and large.

But what happens next?

Simon has set the scene and created a stunning piece of art, but the rest is up to you.
Can the towers withstand the attack?
Who or what is within them to attract the dragon?
Who will be victorious and how?

We think it would be wonderful to spend a summer’s evening in this garden – perhaps after a BBQ with a glass of your favourite drink in hand – inviting family and friends to tell the rest of the story. What do you think happens next? How would you end this great resc-yew story? Why not comment below and let us know!

As always, if you feel inspired by this week’s featured carving, you can talk to Simon about commissioning something unique for your home and garden. Contact us on [email protected].

Into the 20’s – A Review of the Decade

Into the 20’s – A Review of the Decade 150 150 Simon O'Rourke

As we start a new decade, we’ve been reflecting on the many changes that have happened personally and professionally over the last ten years. Professionally, it’s been a great decade with some fantastic opportunities and commissions. We’ve also met some amazing people and seen some wonderful places along the way. Before we move forward into the 20’s, we thought we would bring you our ‘review of the decade’. And, as we do, let us wish you a Happy New Year from all at Tree Carving.

Simon O'Rourke Game of Thrones Egg Carrier carving

Simon and Liz O’Rourke wish you a happy new year (and decade) on behalf of the Tree Carving team.

Review of the Decade: 2010

As we looked back, we could definitely see we didn’t use social media as much! And the technology we used definitely didn’t produce the kind of photos and videos we do today! But here is a look back at two competition pieces from that year, both taking second place. Neptune from the English Open Chainsaw competition, and a traditional miner from the Huskycup.
A quick glimpse at Simon’s awards shows that this was a good decade for competition, placing in most things he entered and winning seven awards. However, when it comes to competitions Simon says:
“Competitive sculpture has taught me a lot about completing work to a deadline. I have competed all over the world and although I have placed highly in many events, the most important thing to me is being happy with my own work.”

Neptune by Simon O'Rourke as featured in his review of the decade

Simon O'Rourke second place huskycup 2010

Review of the Decade: 2011

Two of the projects we chose as highlights from 2011 are The Giant Hand of Vrynwy, and the Somerset Tree.

At 50′ tall, it was no wonder the hand caught the attention of the local press, as you can see in the article by The Leader newspaper. Simon’s inspiration for the hand came from the name for the woodland area, which made reference to giants. Creating something on this scale reminded Simon how small we are compared to some of the living organisms on this planet. He described the experience as being very humbling!

Giant hand by Simon O'Rourke

The next project although tall still, was a little smaller in scale! Simon was commissioned by the Museum of Somerset to create this stunning tree for their new museum. Sourced from local wood, it stands proudly in the museum where it tells some of the area’s 400 million year history.

Tree of Somerset by Simon O'Rourke

Review of the decade: Tree of Somerset by Simon O'Rourke

Review of the Decade: 2012

Another Huskycup entry! This time, the sculpture of “Christian and Mary”. Simon worked on this piece as part of ‘Team Europe’ with Tommy Craggs and Michael Tamoszus. They placed fourth overall, with some tough competition from a great bunch of talented artists. As we had a quick glimpse back at the Facebook album of the event it was lovely to be reminded of the support, encouragement and lovely comments.

Christian & Martha Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

Review of the decade: Christian & Martha Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

fourth place Huskycup 2012 by O'Rourke, Cloggs and Tamoszus

Review of the Decade: 2013

For our 2013 highlight, we chose something a little different. During that year Simon created this incredible Alice in Wonderland booth for Steak of the Art in Bristol. Their vision is for the restaurant to be an ever-changing art gallery that compliments their delicious menu. As you can see from the photos in the case study Simon wrote, his booth more than fits their vision. Every single character is its own work of art, and with so much to see, although the piece doesn’t change, there is something new to notice each time you sit within it. Here we get a reflection of the changing technology too, with this timelapse video of its making!

Alice in Wonderland booth at Steak of the Art by Simon O'Rourke (a review of the decade)

Alice in Wonderland booth by Simon O'Rourke, Steak of the Art

Alice in Wonderland booth by Simon O'Rourke, Steak of the Art

Review of the Decade: 2014

2014 saw us receive a lot of publicity for two ‘guardians’.

The first was created for the ‘Pawtraits‘ series by Maria Slough, and was actually named ‘The Guardian‘. The series featured people photographed alongside animals that had impacted their lives, and Simon was brought in to create a piece to be used for the portrait of Virginia McKenna. Understandably, the actress wasn’t too keen on reclining on a real lion – hence Simon stepping in with The Guardian! As McKenna was so impressed with his work, Simon was later commissioned to sculpt a lion cub for the Born Free Foundation charity auction, a charity McKenna established. As well as the photos below, you can click HERE to see a timelapse of The Guardian being made.

 

The Guardian by Simon O'Rourke

Maria Slough Pawtrait Virginia McKenna featuring lion by Simon O'Rourke

Photograph copyright of Maria Slough from the Pawtraits Series

The other ‘guardian’ created by Simon that year is just as iconic. Phil and Leah from Wahoo Group wanted to harness the power of social media and do something novel to help sell their home. Thinking completely outside of the box (no baked cookies here!) they commissioned a sculpture of…..Batman!

The caped crusader sat on top of their home where it gained attention from both local and global news outlets, and helped the couple find tenants for their property.

Wooden Batman carving by Simon O'Rourke

Wooden Batman carving by Simon O'Rourke

Batman by Simon O'Rourke and St Giles Church Wrexham

As one of Simon’s strengths is Human Form, we also couldn’t resist throwing in this sculpture of Scottish explorer, Mungo Park. He was commissioned for a pub in the explorer’s hometown of Peebles, and sits on this bench for passers by to enjoy.

Review of the decade 2014 Mungo Park

 

 

Review of the decade 2014 Mungo Park

Review of the Decade: 2015

2015 was the year when Simon won the English Open Chainsaw Competition with Hemlock the Dragon.

Since then Hemlock has made countless appearances around the country, including at a wedding! Hemlock has recently had some repair work on the wings, and is ready to meet the public again. If you are interested in hiring Hemlock for your event, just email us on [email protected]

Hemlock the Dragon English Open Chainsaw Competition 2015 by Simon O'Rourke

Review of the Decade: 2016

2016’s highlight is another Huskycup Flashback: Viking Raid.

As well as the Viking Raid Case Study Simon wrote, we also have a blog about Viking Raid for those who want to know more. As we mentioned in our Huskycup 2019 blog, 2016 was actually the last year Huskycup was a competition. It meant Simon was the last ever Huskycup champion, as Viking Raid took first place. What a way to end the competition for him! Although it is no longer a competition, Simon continues to participate, and it is something of a highlight each year.

In 2016 Simon also became an affiliate of Olfi. We love their action cameras, and how they’ve transformed what we’re able to share with you through timelapse videos. Find out more in our Olfi blog!

Viking Raid at Huskycup 2016 by Simon o'Rourke

 

 

Viking Raid at Huskycup 2016 by Simon o'Rourke

 

Review of the Decade: 2017

2017’s highlight is from Liverpool. Simon created a tribute to The Beatles by carving life size figures of the Fab Four live along the dockside over a weekend. You can read more about the event in our Global Beatles Day Blog, and keep scrolling to enjoy our flashback photos and video.

2017 was also the year Simon began being sponsored by Stihl. Not only do they manufacture quality equipment, but it was something of a ‘full circle’ for Si, as his very first chainsaw experience was using Stihl equipment.

 

Beatles at the Liverpool dockside by Simon O'Rourke

 

Nearly done!!

Posted by Simon O'Rourke – Tree Carving on Monday, 28 August 2017

 Review of the Decade: 2018

As Simon says in his case study about the Spirit of Ecstasy, this was one of his most challenging sculptures to date.
You may remember from our Spirit of Ecstasy blog, that Simon recreated the Rolls Royce icon for an enthusiast to give new life and purpose to a beautiful oak tree which had died. Despite the challenges, the finished piece was faithful to the Rolls Royce concept, graceful and simply stunning. We hope you enjoy the finished result as much as we (and most importantly, the client!) did.

Spirit of Ecstasy by Simon O'Rourke

 

 

Review of the Decade: 2019

In our new year blog at the start of last year, we told you 2019 would be our ‘year of the dragon’. We weren’t wrong! Over the year Simon created seven new dragon-related carvings, including an ice dragon in our local town.
It all started off with The Dragon of Bethesda. It sits in an arboretum in North Wales after the landowner commissioned Simon to create something spectacular from a fallen tree. Y Ddraig Derw was featured in national media, and we are still overwhelmed by the encouraging response from so many people to the piece.

Dragon of Bethesda by Simon O'Rourke

 

Our other dragon highlight from the year, is this stunning casket created for HBO’s Game of Thrones.

Game of Thrones egg props Simon O'Rourke

Simon was commissioned by HBO as part of a wider project where artists re-imagined original props from the show. He received these beautiful dragon eggs, and created the casket for them to sit in. You can remind yourself of the whole project and process in our Game of Thrones blog.

Again, we were amazed, thankful and VERY encouraged by all the positive comments we received.

This is also the year Simon became an affiliate for ManpaTools. Their angle grinders especially have taken some of his texture and detail to a whole new level.

Simon O'Rourke casket Game of Thrones Season Eight

Moving into 2020, Simon has also become an affiliate for Saburrtooth. With quality tools and equipment from Stihl, Manpa and Saburr, Simon’s talent and creativity, and the continued support of all our amazing clients and co-workers, we look forward to what the next decade – the roaring 20’s – will hold.

We hope you enjoyed our Review of the Decade. We definitely loved seeing some of these pieces afresh as we looked back.
As always, if you have a project in mind, email us on [email protected]

Ice Carving for Wrexham Museum

Ice Carving for Wrexham Museum 150 150 Simon O'Rourke

Last night Simon was on ‘home territory’ as he took part in the annual Victorian Christmas market in Wrexham. Don’t worry though, he hasn’t traded his chainsaw for a stall and money pouch! Simon’s contribution to the evening was much cooler, if we do say so ourselves. He swapped timber for something much wetter, and did some ice carving for Wrexham Museum.

Crowds watching ice carving for Wrexham Museum

Outside Wrexham Museum*

About the Victorian Market

Wrexham’s Christmas Market has become one of the most eagerly awaited events in the town’s calendar and successfully attracts thousands of shoppers year after year.  This year there was a Victorian theme to the market with Punch and Judy shows throughout the day, and period street performers. The main feature though was 100 stalls from Queens Square right up to and inside St Giles’ Church.

Punch and Judy show at Wrexham Victorian Christmas Market

Punch & Judy on Hope Street

About Ice Carving for Christmas

To coincide with the event, Wrexham Museums also organised and hosted an event: Ice Carving for Christmas. As well as Simon’s ice carving, the museum was open for the public and people could do Christmas shopping in the gift shop and enjoy a hot chocolate or mulled wine in the cafe. Various school choirs performed, including Bryn Hafod Primary who sang in both Welsh and English, and Libby and Sign of the Times. As you can see from the first photo we shared, plenty of people came to enjoy the evening.

Crowds watching Simon O'Rourke Ice Carving for Wrexham Museum

Crowds watching Simon Ice Carving for Wrexham Museum*

Ice Carving for Wrexham Museum

If you read the blog we wrote a couple of weeks ago about the event (visit it here) then you’ll know Simon didn’t just complete one carving. The Ice carving for Wrexham Museum was actually a trail through the town. It began at St Giles church, where most of the market stalls were located, and ended at the Museum.

In the first location, Simon began by carving one block of ice, which was a clue as to what the final ice sculpture would be. People could then follow him to second location where he carved a second block, giving people a second clue.

They could then follow him to the museum where they could submit their guesses as to what his final carving would be, and any correct answers won a prize.

*spoiler alert*

For those who know that 2019 was a year full of dragons for us, it will come as no surprise that the final sculpture was this stunning dragon head.

It lives!! The dragon head, complete with smoke!!

Posted by Simon O'Rourke – Tree Carving on Thursday, 5 December 2019

Let us take you back though through the evening as the audience experienced it though…..

Setting up:

Working in the multiple areas gave Simon and Paul the first challenge of the night – getting all the equipment through the thousands of people attending the Victorian Market! They had everything loaded up on a cart, and the high vis jackets definitely helped them get noticed so the crowds could part a little. It definitely wasn’t the quickest or easiest transportation of equipment though!

Paul and Simon making their way through the crowds attending the market!

Simon O'Rourke safety jacket

Paul and Simon making their way through the crowds attending the market!

St Giles Location

The first location was St Giles church where Simon carved this stunning dragon’s eye. Standing it the crowd, it was fun to be able to hear people’s awe as they watched. Especially as the chain saw went all the way through the ice to carve the space that became the eye! Several people were also commenting on how clear the ice was. Many guessed correctly that we didn’t just freeze water from our hosepipe to make the blocks. Rather, they are especially made for events like this. There’s a science behind it, but you can actually do it at home! Read all about how crystal clear ice is made at Barschool.Net. We’re happiest to leave it to the professionals, but if you try it yourselves, let us know if it works!

As we have said before, it is the lighting that makes the difference when ice carving. This green lighting reflecting off the scales Simon created is definitely eerie and mysterious, which helped add to the sense of mystery and anticipation of what the final carving would be.

Viewers outside St Giles*

Early on in the work on the dragon’s eye

Simon O'Rourke working on an ice carving of a dragon's eye, Wrexham 2019

Adding textured to create the scales*

Dragon eye at Ice Carving for Wrexham by Simon O'Rourke

The finished dragon’s eye*

Henblas Square

The second location of the night was Henblas Square.
Here, as well as the general admiration of what Simon was doing, I could hear many more questions about the equipment.

“His hands must be freezing” was also a pretty common theme!

Unlike most people were thinking, Simon wasn’t using specialist ‘ice carving’ equipment. He used his faithful Stihl battery powered chainsaws (complete with the handy backpack you will have noticed for the battery packs) for most of the initial carving. This meant they were lightweight and didn’t need a power supply. Perfect for this kind of mobile evening. He also used his Manpa tools angle grinder, with burr bits by Saburrtooth. And, while we’re speaking of Saburrtooth, we’re excited to announce Simon will become one of their ambassadors in 2019!

It was nice to see so many people stay and watch the entire carve here. For a long time people were guessing it was going to be eagles, rather than (as you can see) this amazing dragon claw (clue number two)! It really is fascinating to watch, but the audience were also encouraged to stay by the unusually warm evening. After several nights of hard frost, it was 10°c! Although being a warmer night was helpful for the audience and shoppers, the warmer weather meant Simon had to carve extra fast as the ice was melting far more quickly that he’d hoped!

Simon O'Rourke ice carving: dragon claw

Simon o Rourke Ice Carving for Wrexham Museums 2019 Dragon Claw

The finished dragon claw, clue number two in the ice carving trail

The finished dragon claw, clue number two in the ice carving trail*

Wrexham Museum

The museum location was the longest of Simon’s carves, and he used six blocks of ice rather than the one that he used at the other locations. Even before he arrived, people were fascinated by the ice on the museum forecourt.

ice blocks for carving wrexham museum 2019

Blocks of ice waiting for carving!

Simon was challenged here not only by the ice melting in the warmer weather, but also an impressive wind. At one point the leaves spiraling in the air looked like a scene from The Wizard of Oz! It didn’t put people off watching though, and in some cases it was hard for parents to pry their children away.

Ice Carving for Wrexham museum 2019

Watching outside Wrexham Museum*

Simon o'Rourke ice carving dragon Wrexham 2019

Adding texture with an angle grinder

Simon O'Rourke adding detail to an ice carving dragon, Wrexham 2019

Adding detail to the dragon

One of the perks of Simon being on ‘home turf’ is being able to watch him. Another is being able to hear and see other people’s reactions. The audiences at all the locations were a mix of people who have followed Simon and his work for years, and others who had never even imagined creating something with a chainsaw!

“The precision is unbelievable”

“I’m so impressed with the talent and detail he is able to produce with a chainsaw”

“I’ve never seen anything like it before. It’s bold and beautiful”

“I was only going to stay ten minutes but once I started watching, I had to stay until the end”

“The detail is unbelievable”

“Stunning. Simply stunning”

We can’t help but agree! The lighting bouncing off the textured scales and the smoke  just made it perfect. Even still in process, it looked spectacular in the light.

Dragon Ice carving in process by Simon O'Rourke

The Finished Piece.

Thank you to Wrexham Museums for organising and hosting the event so well (and for the mulled wine the staff not wielding chainsaws enjoyed!). Thank you too to Shaine Bailey and Treetech for sponsoring the event. And to everybody who came and watched, shared on social media, and complimented Simon on his work. It’s lovely to be able to meet people, and to have such a lovely and encouraging audience. It’s also great to finish our year as it began, with a dragon that captured the attention and hearts of the people who saw it (read about the first dragon, Y Ddraig Derw here).

And so, we leave you with the finished piece for 2019’s Ice Carving for Christmas*:

Ice Carving for Wrexham Museum Christmas 2019 Finished dragon head by Simon O'Rourke

 

Dragon head in ice by Simon O'Rourke

Dragon head in ice by Simon O'Rourke

If you would like to book Simon for your event (ice or timber!) email us on [email protected] to talk about details.

*photo credit to Gareth Thomas from Wrexham Museums.

Trees for Kids Sculpture at Maes Y Pant

Trees for Kids Sculpture at Maes Y Pant 150 150 Simon O'Rourke

One of Simon’s pieces that caught people’s attention recently was a little boy, kneeling to plant a tree. The Trees for Kids sculpture was commissioned by a local community association, and unveiled during their Trees for Kids event.

Trees for Kids 'Boy Planting Sapling' sculpture by Simon O'Rourke

About Maes Y Pant

Maes Y Pant is a 70 acre forest on the outskirts of Wrexham.
The site is open to the public, but the land is actually owned and managed by a community association. It is a conservation area, recreation area and also sustains itself with soft lumber sales. Regular readers will remember that Simon and some our our affiliates have produced other sculptures on the site, including Stanley, and the children’s fort.

Trees for Kids sculpture by Simon O'Rourke in progress at the workshop

Trees for Kids sculpture in progress at the workshop

Trees for Kids

This particular commission was part of Trees for Kids, an event which was both sociable and educational. There was opportunity to explore the forest, as well as a story teller, stalls, and face painting. The HACK horse sanctuary brought a pony, and there were also educational stands to raise awareness of the importance of woodlands and taking care of the environment. The highlight of the day though, was planting saplings.

The Commission.

Each child who took part was able to plant a sapling to help sustain the forest. It’s easy to see how Simon’s sculpture tied in with such an event! One aspect that isn’t so easy to see though, is that like the forest around it, this sculpture will also grow and change!

What? How?!

Trees for Kids sculpture with rowan sapling. Simon O'Rourke for Maes Y Pant

With the planted sapling at Maes Y Pant

Growing and Changing

If you look closely at the photo above, you will notice what looks like a thick stick between his hands. That’s actually a Rowan sapling! In time, as well as gaining height, the tree trunk will broaden to fill his hands. The little boy was secured in the ground with a substantial foundation. This means that as the tree grows it will grow at a slight angle, giving room for the roots to establish. The community group will also manage and trim the tree so visitors will always have a good view of the sculpture.

Always a Story Teller

The boy is carved from Welsh Oak. The tree is native to the area, adding to the sense that the boy ‘belongs’. He makes a sweet addition to the forest. We love the look of concentration as he focuses on what he is planting! His haircut and outfit also seem to hint at a past age, and evoke memories of kids playing outside, and enjoying the outdoors.

We hope that the children (and adults!) who visit the area will be motivated to preserve not just this beautiful local area, but also our wider environment.

To commission Simon for your own special occasion, email us on [email protected]

The Case of the Sherlock Holmes Bust

The Case of the Sherlock Holmes Bust 150 150 Simon O'Rourke

Sherlock Holmes. He may not have been the first recorded fictional detective, but Guinness World Records lists him as the most portrayed. Ever since his first appearance in 1887, we’ve seen him in books, comics, movies, TV series, art work and more. In fact, he’s been played by over 75 actors! Now, in 2019, we bring you: Simon O’Rourke’s tree carving ‘Sherlock Holmes Bust’.

Sherlock Holmes bust by Simon O'Rourke

The Timber

The Sherlock Holmes bust was for a private client who commissioned it as a gift. He’s made from oak which means that although he is pale at the moment and has some yellow tones, in time he will get darker. The rings and markings will become black as it makes contact with rain, and the UV rays of the sun will cause the wood to pick up greyish hues. In combination with the natural darkening, it means that as he ages, the wood will become more reminiscent of the furniture and drawing room decor of the Sherlock’s own era.

Sherlock Holmes bust by Simon O'Rourke

It’s all in the Details!

Fans of the detective will have noticed a few interesting details on the Sherlock Holmes bust that refer to Conan Doyle’s original short stories, and four novels.
Incidentally, as well using his trusted Stihl and Manpa tools for this project, Simon also used the Saburrtooth burr bits on the die grinder and some of their small rotary tools to achieve the details and texture. But back to the details! Simon included nine ‘clues’ or references to the Sherlock Holmes stories on the bust. Can you spot them all? See how many you can find before we reveal all later!

Sherlock Holmes Sculpture by Simon O'Rourke

The Inspiration

One of the problems when creating a sculpture of a character from a book, is that there isn’t a definitive image to work from as there would be a historic figure. This is only heightened when he has been represented by so many different people on screen too! As the client is a fan of the fiction and not just a particular on-screen representation of Sherlock, Simon chose the Sidney Paget illustrations as his inspiration.

Paget illustrated the original Conan Doyle stories for The Strand magazine. With over 350 illustrations created by Paget, there was no shortage of imagery to work from! Simon not only used the facial features of the Paget artwork as the basis for his carving, but was also attentive to the original stories as he added details to the bust. One of the most obvious of these is the shape of the pipe. Although we have come to associate Sherlock Holmes with a large, curved meerschaum pipe, there is actually no reference to this in the original stories. By choosing something simpler and less iconic, Simon has ensured the bust is faithful to the original illustrations rather than the images that evolved over time.

Sherlock Holmes by Simon O'Rourke

The Big Reveal!

All good detective stories end with a ‘big reveal’. Thankfully, when this sculpture was revealed to the birthday person, it was received better than the surprise the characters often get in crime fiction! We are glad to say that the client told us Sherlock arrived this afternoon and is now in its final location. We’re absolutely delighted – it is stunning!”

And now, for our other ‘big reveal’: The clues within the Sherlock Holmes Bust……

Snake and Baker Street Detail from Sherlock Holmes Sculpture by Simon O'Rourke

 

The Hidden Clues

As you look at the various views of Sherlock, you should hopefully find the following ten references to stories:

1. Stiletto dagger he used to pin correspondence to the mantle piece
2. Pince nez glasses – The Golden Pince-nez
3. Honeycomb – His Last Bow
4. Broken crown – Musgrave ritual
5. Persian slipper he used for storing tobacco

Sherlock Holmes tree carving statue by Simon O'Rourke

6. Handgun
7. 221b plaque
8. Snake – The Speckled Band
9. Violin
10. Stick Men – The Adventure of the Dancing Men

Oak Sherlock Holmes Bust by Simon O'Rourke

We loved this commission, because as well as being an opportunity for Simon to show his talent for human form, it was such a unique gift to create. If you need a beautiful, unique and sustainable gift for somebody, contact us on [email protected] to talk about the details.

World War I Memorial Soldier

World War I Memorial Soldier 150 150 Simon O'Rourke

This coming Sunday is Remembrance Day: a day to remember those who lost their lives in war.
We don’t take that sacrifice lightly, so it’s always an honour when Simon receives a war memorial commission.  Whether it’s a statue or a giant poppy, it’s an opportunity to both do his best as an expression of his own respect thankfulness. It’s also an opportunity to help others remember and be thankful. His best known example is probably the Airman at Highclere Castle. However, today, we’re going to revisit this World War I memorial soldier.

World War I Memorial Soldier, Astley Park

The Commission.

The World War I Memorial Soldier was commissioned by Chorley Council, and is installed in Astley Park. It is not their only tribute to those who died during war, and guests can take part in a  whole World War One experience which includes this Garden of Reflection. Estimates suggest nine to 11 million military personnel died during World War I. This soldier standing alone though encourages us to think not of the masses, but of the individual soldier who lost his life. The son, brother, uncle, friend.

World War One memorial soldier by Simon O'Rourke Chorley

The Soldier

Looking at this soldier, it is easy to see some of the cost of war. The slump of his shoulders, and slightly hunched posture speaks of a fatigue. Maybe a disenchantment. His disheveled uniform and minimal weaponry tells us of men ill-prepared for the horrors of battle. And his face makes it clear he has seen loss and pain. The weathering of the wood and imperfections that appear over time, only enhance this portrait. This is not a soldier freshly out of boot camp, immaculate and passionate about his calling. This is a man who has given up everything and seen too much. And this man, and the millions like him are what we remember, with thanks.

World War I soldier by Simon O'Rourke, Chorley

Lest We Forget

This World War One memorial soldier is only one of thousands of tributes around the country. We hope that as people look at this one, Simon’s skill in portraying this soldier’s story through sculpture will speak to them. That it will help people to think about what it is that was lost, not in terms of millions, but the cost to each family of ‘the one’.

Of course, we couldn’t JUST revisit this soldier. Another name for remembrance day is ‘poppy day’, so to finish, we naturally had to include some of the poppies he has made. Skilled as Simon is with human form, these sculptures have also helped to catch attention and capture beautifully the flowers which appeared in Flanders after World War I.

Poppy scultpure by Simon O'Rourke

Giant poppy outside wrexham museum by Simon O'Rourke

Giant poppy in 2014

If you are interested in having your own memorial carved by Simon, why not email us on [email protected]

Whether it’s a specific person or thing, or something general, Simon is able to use his skills, imagination, creativity and attention to history and detail to create something perfect for your tribute.

Ice Carving for Christmas

Ice Carving for Christmas 150 150 Simon O'Rourke

The countdown to Christmas is on! Shops are full of decorations, calendars are filling up, and Christmas music is starting to hit the radio. It’s also that time of year where Simon takes a break from wood for an evening or two, and turns his hand to ice sculptures. This year he’ll be digging out his thermals to take part in ‘Ice Carving for Christmas‘ organised by Wrexham Museums. Although Simon is privileged to travel nationally and internationally, it’s also fun for us when we get to participate in local events, and important to us to be engaged with our local community. We can’t wait for December 5th!

Wrexham Ice Carving for Christmas posters 2019 featuring Simon O'Rourke

The Event

Ice Carving for Christmas promises to be a great evening for all ages. Guests follow a trail that starts at St Giles Church and ends at the museum. They also have not one, not two, but THREE opportunities to see Simon carving along the way!

Station One is near to St Giles church and Victorian Market (5pm-6pm). After watching Simon carve, guests can spend time at the market which promises to be bigger and better than previous years. There’ll be all kinds of stalls ranging from local crafts to food and drink.

 After enjoying the market, guests can move on to work station two from 6-7pm. There will also be food and drink vendors along the street, as well as late night opening for some of our high street shops. 

Then it’s on to the Museum for the main event (7pm-9pm ). People who watched the first two stations can make their guess as to what the finished carve will be, with prizes for those who guess correctly. So, much as we would love to tell you, we’re keeping it quiet. No spoilers here! At the museum, there will also be opportunity to sing somecarols and join in the Christmas spirit with festive refreshments from the café.There’ll also be chance to get some photos with Simon and the finished carve. Perfect for sending out with family Christmas cards!

Past Ice Sculptures

Regular followers will know this isn’t Simon’s first time ice carving. This week we shared this Facebook post with a flashback to some spectacular ice carving he did for Cardiff Ice Kingdom in 2015.

Cardiff Ice Kingdom sculptures by Simon O'Rourke

Simon’s work at 2015 Cardiff Ice Kingdom

Cardiff Ice Kingdom Santa sculpture by Simon O'Rourke

2015 Cardiff Ice Kingdom Santa Sculpture by Simon

Local Ice Carving

Simon also took part in Wrexham’s 2017 Ice Carving for Christmas. As he will in this year’s event too, Simon worked outside the museum. People could watch as he transformed these blocks of ice into beautiful, detailed penguins.

Simon O'Rourke at the start of 2017's Ice Carving for Christmas event

Simon at the start of 2017’s Ice Carving for Christmas event

Penguins in Ice by Simon O'Rourke

Finished penguin ice carving

From Wood to Ice

Obviously ice is a very different material to wood! When Simon makes the transition, there are a few things he has to keep in mind for a successful carve.  For example, time!

One thing we all know about ice, is it melts. Fast! So whereas Simon might work on a typical sculpture over several hours or days, with ice it is more like one of the ‘speed carving’ events.

Simon O'Rourke Ice Carving in progress 2017

Penguins in progress in 2017

Another difference is that ice is much more brittle.
This means when Simon begins thinking about his designs, he can’t include as many delicate shapes. The work focuses on bringing lots of detail and texture to larger shapes for the light to shine through and bounce off. Which leads to the final difference we’ll highlight here today: presentation.

When using wood, working with the tree’s natural lines, colours and shapes is crucial. The sculpture then speaks for itself as people view it. With ice, the success is often down to light. That includes the nature of the lighting itself e.g. will it be multicoloured? Shades of the same colour? How will the lighting help tell the story of the sculpture and set the scene?

It also includes how the sculpture will ‘interact’ with the light. Where will the light hit and bounce off? At what points will it shine through? Where will it help bring depth to a particular part of the sculpture? And so, Simon must consider this both as he plans, and as he progresses.

These photos show perfectly both the texture and the impact of lighting on his 2017 Ice Carving for Christmas penguins.

Close up of penguin ice carving by simon o'rourke

Close up of ice penguin showing the impact and importance of lighting

Penguin Ice Carving by Simon O'Rourke for Ice Carving for Christmas 2017

Close up of ice penguin showing the impact and importance of lighting

Not All Change!

Of course, it isn’t all change! Some things will stay the same as Simon switches from wood to ice this year.

He will still be using his faithful Stihl chainsaws, and their battery chainsaws are perfect for events like this. He’ll also be thankful for their thermal clothing and waterproof protective trousers! Whether wood or ice, or any other outdoors work, nobody wants to be cold and wet! Obviously, whatever he’s carving (remember, no spoilers here!) and whether wood or ice, the level of excellence, creativity and skill that Simon brings will stay the same.

Ice carving penguins by Simon O'Rourke

 

Queen of the South Legends Unveiled

Queen of the South Legends Unveiled 150 150 Simon O'Rourke

Back in May we started sharing videos and photos of a statue of three footballers that Simon was working on. Five months later, we’re proud to see the statue of the Queen of the South legends finally installed and unveiled!

Queen of the South Legends statue by Simon O'Rourke unveiled in Dumfries

Queen of the South Legends Statue unveiled October 2019

The Commission

The statue was commissioned by The People’s Project and stands outside the Queen of the South stadium in Dumfries. The People’s Project exists to help rekindle community within Dumfries. It does this through practical projects, funding of community initiatives, and creating opportunities to remind people of the heritage of their town. This statue isn’t their first commission, and they have also restored or commissioned statues of Robert De Bruce, and Peter Pan.

This particular commission commemorates three of the legends of Queen of the South FC: Billy Houliston, Alan Ball, and Stephen Dobbie. Each player represents a different era, achievement and contribution to the club. To find out more about each player, visit http://www.qosfc.com/news-4765. We think it’s always inspiring to read about passion t,alent and dedication, even if football may not be your thing!

Stephen Dobbie with his likeness at the unveiling of the Queen of the South Legends by Simon O'Rourke

Current player Stephen Dobbie with his likeness at the unveiling

Making the Statue

This statue was always going to be a challenge. The original goal was to make the three life-sized players out of one piece of oak:

About to begin a project that will be a big challenge… And for once it isn't a dragon!!Three life size footballers in one log…

Posted by Simon O'Rourke – Tree Carving on Wednesday, 22 May 2019

If you watched the video, you would have seen Simon refer to a crack throughout the timber. That obviously meant he had to react immediately, and think about how to work with and around that crack. In the beginning this seemed to have a simple solution. Just turn the trunk upside down!

In addition though, he had to think not only about what that crack is like in the moment, but what would happen in years to come. It turned out that when he considered the Scottish weather, that crack was going to create some problems. Simon ended up having to cut out one player, and use a second piece of timber, as you can see in the next video. Every cloud has a silver lining though! Removing that player helped Simon overcome one of the other challenges in a 360° statue – reaching the backs of the other players!

An update on the footballers!!

Posted by Simon O'Rourke – Tree Carving on Monday, 1 July 2019

Queen of the South FC statue in process after a player had been removed, allowing Simon to access the backs of the other players

The statue in process after a player had been removed, allowing Simon to access the backs of the other players

Creating a Likeness

As well as technical challenges, there was then the task of creating an accurate likeness. As we’ve mentioned in this blog, this means not only dealing with correct shape and ratio, but also the challenge of depth. In this case too, it also has to be true to life, and there isn’t as much artistic license. Especially in the case of a statue like this where the purpose is to honour people, Simon always wishes to capture them in a way which is accurate and tells a story of who they really are. For those who wonder how possible that is when using power tools, this comparison says it all!

Close up of Billy Houliston statue with one of the photos Simon worked from to create The Queen of the South legends

Billy Houliston statue with one of the photos Simon worked from

Creating Community – Not Just a Statue.

Part of the purpose of this statue was to commemorate the Queen of the South legends. It is has a bigger purpose that goes beyond this though.

The reason for commemorating these players is to remind the Dumfries community of their heritage. To remind them of town and community achievements they can be proud of. It reminds them of things they have in common like the love of a sport or a hero. It gives a focus for unity and remembering positive moments in their community. For the younger person looking at these players immortalised in wood, it gives something to aspire to. And for the older generation, it can bring about a sense of nostalgia and ‘the good old days’ that brings joy and encouragement. The kits from the different eras clearly show achievements across the years and history, and so it helps unite generations in a mutual appreciate of their team and its history.

Stephen Dobbie and club officials at the unveiling of the Queen of the South legends statue by Simon o'Rourke

Stephen Dobbie and club officials at the unveiling

And so, statues like this are more than just pieces of art to be admired. They also help unite, inspire, and promote community. Even the simple act of coming together for an unveiling ceremony helps create all these things.

If you are part of a town, club, society or community and would like to explore a similar idea, why not send us a message? As always, Simon is available on [email protected] to talk about your vision, hopes and the practical details.