Posts By :

Jo Dunbar

A Throne Fit for a King Officer

A Throne Fit for a King Officer 150 150 Simon O'Rourke

Sometimes you don’t need an excuse like an anniversary to install a piece of art.
Do you ever see something you admire and think ‘I’d like one of those’? That’s kind of what happened with this week’s featured sculpture: The RAF dragon throne.

Close up of the RAF Valley Dragon by Simon O'Rourke

The Story Behind the RAF Dragon Throne

The story of this sculpture actually began back in February, not long after Simon revealed The Dragon of Bethesda . Squadron Leader Leah Richmond at RAF Valley, Anglesey (North Wales) saw the dragon Simon had carved as a private commission. She had a space on the RAF base that needed ‘something’, so she contacted Simon about getting their very own dragon! Or at least, that’s the quick summary! Simon created this rather dignified looking beast in the Spring, and it was unveiled this week during the annual base reception and sunset parade.

RAF Valley Dragon Throne by Simon O'Rourke in progress

Early work on the dragon throne

The Dragon Throne’s New Home

RAF Valley provides fast-jet training as well as training for aircrew working with search and rescue. The base became known throughout the UK when Prince William was stationed there 2010-2013. The North Waelsh population knew of it a long time before that however. Many a holiday-goer in Snowdonia is treated to the sight (and sound!!!) of a low flying Hawk!

The dragon was a meaningful choice for this base, as not only is the dragon on the national flag of Wales, but it is also on the RAF Valley emblem. This side by side shows how Simon has taken the very simplistic image from the badge, and re-imagined how that would translate into a real animal. The dragon’s expression and more rugged texturing (rather than smooth, even scales) really enhance the sense of a rugged,  aged guardian.

Comparison of RAF Valley Dragon with Simon O'Rourke's Sculpture

Comparison of the dragons

The Making of the Throne

Making the dragon took six days of work, from the initial hollowing out of the oak that is the main frame for the thone, to completing the fine detail. The shape of the wings which provide the back and sides of the throne, remain faithful to the dragon on the badge, and the overall scale provides a fittingly regal overall impression. Truly a throne fit for an officer!

As the oak ages, it will take on a much darker colour and warmer tones. In time, those tones will contrast beautifully with the seat which is made from Cedar of Lebanon. The cedar will also darken in time, but take on grey hues – coincidentally reminiscent of the RAF uniforms!

As always, Simon used his faithful Stihl chainsaws to create the throne. For those who are interested in this side of what Simon does, check out the MS 500i and the MSA 200 which were both used for this sculpture. Both have been great additions to his collection of tools. The MS500i is great for its power, lightweight design and how easy it is to operate when there is heavy duty ‘chopping’, hollowing and shaping to do! The MSA 200 gives Simon the usual Stihl functionality as well as all the benefits of using a battery operated saw – and is quiet enough to use on site in residential or public areas.

Completed Dragon Throne by Simon O'Rourke

The finished throne!

Unveiling the RAF Dragon Throne

The unveiling of the throne happened at the annual base reception this week. It made quite the impact, and was admired by the staff, local dignitaries and other attendees. It also created some entertaining Twitter conversation that you can read here!

Simon O'Rourke with RAF Valley Station Commander Chris Jones and the completed dragon throne

Simon O’Rourke with RAF Valley Station Commander Chris Jones and the completed dragon throne

 

Liz O'Rourke with Sqn Ldr Leah Richmond who envisioned and initiated the throne

Liz O’Rourke with Sqn Ldr Leah Richmond who envisioned and initiated the throne

This sculpture began life when somebody saw and admired another of Simon’s pieces. Which carvings have you seen and thought ‘I want one of those’? Drop us a comment below!
Even better, why not email [email protected] and have a chat about how you could have your own?

Carved Day’s Night: Global Beatles Day

Carved Day’s Night: Global Beatles Day 150 150 Simon O'Rourke

June 25th was Global Beatles Day. Yes, there is such a thing!
The day celebrates the ideals of The Beatles, and honours them as individuals. We love the music of the Beatles, and with Simon also being a Liverpudlian, we couldn’t let it pass without a flashback to Simon’s Beatles carvings.

Simon carving The Beatles

Work in progress!

Simon created The Beatles sculptures over four days in Liverpool in August 2017. It was part of an event at the pier head, so locals were also able to watch Simon at work. Needless to say, they loved seeing their very own ‘fab four’ coming to life!


Beatles Sculptures outside the Liver building for Global Beatles Day

Making each figure took around six hours. From facial details to posture, each one is a great representation, and reflects Simon’s talent for human form. The ‘Fab Four’ were then auctioned off in aid of Variety charity, and ended up raising over £15,000! Global development and human rights were important to the members of the band, and as Global Beatles Day also celebrates their values, we reckon that fantastic result is another good reason to revisit these pieces today.

Simon O'Rourke Celebrating Global Beatles Day with his Beatles sculptures

Simon with the finished band!

Since then Simon has recreated lots of figures from the airman at Highclere Castle to other Liverpudlians like Cilla Black and Ken Dodd. You can see some of his human form portfolio here.

If there are events, anniversaries etc that you would like marked with your own sculpture, get in touch with us at [email protected] to find out more.

Huskycup 2019

Huskycup 2019 150 150 Simon O'Rourke
Huskycup 2019

And just like that, Huskycup 2019 is over! After a week of carving by some of the best chainsaw carvers in the world, Blockhausen now has several dragons added to its exhibits – including the fabulous Water Dragon by Simon and Japanese tree carver Keiji Kidokoro.

As we wrote in THIS BLOG, Simon and Keiji had the freedom to make anything relating to the theme ‘dragons’. They decided to create a dragon which would reflect both their cultures, in an ‘east meets west’ Water Dragon.

Simon and Keiji with the finished water dragon

Simon and Keiji with the finished water dragon

East meets West

Initially the dragon seems predominantly Asian because of the serpentine shape and the wave it rests on. Closer look shows a beautiful merging of the cultures though. For example, the wings are very much the scale of those seen in western interpretations of dragons. It also features a more typically western profile with the sloped nose. Up close, we can also see scales more consistent with the dragons of Hollywood movies than those of Asian design.
What other features can you see belonging to each culture?

Initial sketch of Water Dragon by Simon O Rourke and Keiji for Huskycup 2019

The initial concept sketch by Simon

 

Profile view of the finished Water Dragon

Profile view of the finished Water Dragon

Team Work

Part of the success of this dragon was working to each of their strengths. Simon and Keiji have carved together before (Japan 2015 & 2016) which was an asset when designing the piece. Simon imagined and drew the initial design, but very much incorporated Keiji’s skill in fine detailing and consistent texturing. Keiji is also talented with an airbrush, and painted the eyes and a piece of tail. We think both are lovely finishing touches which help bring life to the sculpture.

Keiji painting the eye

Keiji painting the eye

 

View showing the scales over the entire body

View showing the scales over the entire body

 

View from the tail shows another airbrushed touch of colour

View from the tail shows another airbrushed touch of colour

One of Simon’s strengths is creating movement and story in his pieces. As such, he enjoyed working on the coils that create the shape and movement of the dragon. That meant creating the shape of each piece, but also working out placement, so it would be realistic and retain the overall flow of the sculpture. We think he did a great job!

Focus on the coils that gave the eastern serpentine feel

Focus on the coils that gave the eastern serpentine feel

Not All Smooth Sailing (Carving)

Those who follow us on our Facebook page will have seen that the dragon wasn’t without its challenges though! Reaching some parts of the dragon needed some serious climbing and balancing skills! They also drew the smallest pieces of timber in the lottery, and later discovered some rotten wood which meant pausing work to resource something more suitable. Small challenges though in a week which was otherwise packed with successful carving, being inspired by others and enjoying time with the tree carving community.

Their initial wood supply

 

Carving those hard-to-reach places at Huskycup 2019

Carving those hard-to-reach places!

Only As Good As Your Tools!

Simon also got to try some new tools. As always, Stihl (Stihl DE) were faithful to provide chainsaws which are always up to the task! He also got to try some new angle grinding tools provided by Korean company, Manpa. It can be a bit of a gamble working with unfamiliar tools, but in this case it worked out. Both the Stihl and Manpa tools turned out to be great choices for Simon.

Simon working on some fine detail

 

Simon O'Rourke working on some detail for his Huskycup 2019 carve

Working on some fine detail on the wings

Beyond the Carve

Huskycup is about more than the carving though. Blockhausen itself is always worth a visit, but part of what makes the event great and draws back such a high calibre of artist, is the atmosphere and community. The venue even features its own Walk of Fame, honouring artists in the tree carving community! Simon received his star in 2012, and he felt this year’s additions were great choices.

Huskycup 2019 finished carve by Simon O'Rourke and Keiji Kidokoro

The finished head

 

A final photo of the finished Water Dragon

A final photo of the finished Water Dragon

Oh, and for those who noticed the little guy at the front right of the photo? This baby dragon is not only bringing the cute to your screen right now (and showing Simon’s versatility in dragon carving!), but will feature in the Huskycup 2019 charity auction.
Baby dragon for charity auction

Baby dragon for charity auction

For those wanting to see more, the organisers have already started to upload photos and videos which you can enjoy HERE.
Of course, there’s nothing quite like experiencing it for yourself! Huskycup is open to the public, and Blockhausen is open all year round where you can see the Water Dragon for yourself, as well as other creations from over the years.

Blood Donor Day!

Blood Donor Day! 150 150 Simon O'Rourke

 

June 14th is WHO Blood Donor Day. The event raises awareness of the need for safe blood and blood products. It is also used to thank donors for their life-saving gifts of blood. Working with chainsaws, there’s obviously a lot that can go wrong, so we’re thankful that nobody on the team has ever needed to be the recipient of donor blood!!!!

We wanted to take the opportunity though to highlight Blood Donor Day (if you’re a healthy adult, have you ever thought about being a donor?). We also thought it’s a good excuse to look at some of the good practice that has kept Simon and the other staff away from A&E, and give some tips to anybody thinking of exploring chainsaw carving.

stihl chainsaw

Stihl Chainsaw – can be used for creative or practical purposes, but either way, safety is paramount!

The Legal Stuff

The first thing is GET YOUR CHAINSAW LICENSE! This ensures you are trained to work competently with a chain saw. There are several ways you can go about this, but a good starting point is the TKF website.

Simon always has a health and safety policy in place wherever he works. This includes things like roping up when necessary, safe use of scaffolding, storage of equipment, and safe distances for others. Although health and safety assessments can seem tedious, they really do help think through the possibilities. In turn, this ensures everybody is doing their best to stay safe. If you are planning on some chainsaw art, even if you don’t need to write a policy, think through the possibilities, assess your site, project, tools and personnel and stay safe!

Scaffolding in place for work on a sculpture

Scaffolding in place for work on a sculpture

Top Tips for Chainsaw Safety

Our other top tips include:

  • maintain the chainsaws properly.
  • always wear the correct safety equipment.
  • time invested in best practice is always worth it.
  • take time to think through best positioning of equipment, especially ladders and scaffolding, and work within the guidelines provided by the manufacturer.
  • know you limits!
    Tiredness, being distracted by hunger, using equipment too heavy for your fitness level and physical capability etc can all compromise a person’s safety. There’s no shame in knowing when to stop and take a break. This is also key in avoiding things like Repetitive Strain Injury.

We love when people get creative and try new things. BUT!!! Let’s stay safe and make sure the only blood-giving we do on world blood donor day is intentional!!!!

Huskycup Flashback: Miners & Vikings

Huskycup Flashback: Miners & Vikings 150 150 Simon O'Rourke

In a week’s time (8th-10th June) Simon and his wife Liz will be in Germany for The Huskycup.
The Huskycup is an annual event in Blockhausen with demonstrations, exhibits, and a speed-carving competition. At one time it was a competition, but is now a more relaxed demonstration and exhibition event. Artists pair up over the week to create something that ties in with the theme, without the pressure of competition. Simon has often participated, and took first place in 2016 with our first Huskycup Flashback: Viking Raid

Viking Raid, Huskycup 2016

Viking Raid, Huskycup 2016

About Huskycup 2019

Simon will partner with Japanese artist Keji Kedokoro for this year’s event. They will join five other teams to produce the best sculpture they can over the two days. This year’s theme is especially fitting for 2019 for us – Dragons!

The teams can produce anything their imagination allows! It can be realistic, comic, imagined or recognisable from a movie or TV show. The choice is theirs! We’ve seen Simon create amazing dragons in all those styles, so we can’t wait to see what he makes this time!

Until then, here’s another Huskycup flashback: The Bergmen (Miners)….

Simon O'Rourke's Bergmen in progress at Huskycup 2018s

Simon O’Rourke’s Bergmen in progress at Huskycup 2018

Revisiting Huskycup 2018

Simon’s challenge was to recreate a likeness of 15th Century German miners. He loves sculpting human form, so this was a project he could really sink his teeth into. This carve allowed him to show his skill in creating not only lifelike human form, but also historically accurate, realistic clothing through details like buttons on the uniform or the sense of movement of the cloth.

Simon O'Rourke miner carving

Working on details of the miners at Huskycup 2018

"Simon

"<yoastmark

Simon’s inspiration for his human form sculpting comes from Rodin and Bernini. Both are artists known for their use of texture, and for pioneering a style where they created motion and ‘story’ in their sculptures. Simon was faithful to that ideal when he carved these miners. Rather than being presented in a pose, they invite us into a story. It’s pretty clear these re-enactment 15th century Bergmen are delighted with their likeness!

The finished Miners, Huskycup 2018

The finished Miners, Huskycup 2018

Looking Forward

As well as the opportunity to carve, one of the fantastic parts of events like this is the community. The website shows it is going to be an amazing event. There will be great food and drink and entertainment. The speed carve features Germany against a combined Czech Republic and Slovakian team – who are keen to win after their defeat to Germany last time. There will be various demonstrations and craft stands as well as machinery exhibits and even glass work. We just hope the weather co-operates!

We’ll be sharing Simon’s work and news from the event on our Facebook and Instagram.  We wish all the artists good luck, and look forward to sharing with you the finished dragon!

Huskycup 2018

Simon is available for competitions, events and commissioned work. Email [email protected] or use the form on our contact page for information, quotes and availability.

 

 

 

 

Arb Show 2019

Arb Show 2019 150 150 Simon O'Rourke

Every year in May, the Aboricultural Association runs its flag ship event: The Arb Show. It describes itself as being “A celebration of the science of trees”, and Arb Show 2019 definitely lives up to that!

Simon & Stihl

This year the main sponsor for the event was Stihl – who also sponsor Simon! They had a large exhibit at the event, and Simon was invited to take part. Over the two days he performed demonstrations of chain saw carving, and met with people to talk about his art.

Stihl Exhibit at The Arb Show 2019

Simon at the Stihl Exhibit, Arb Show 2019

Demonstration Time!

Simon carved two pieces over the two days, while talking people through his process. He used Stihl’s new MS500i chainsaw for the first time to make the first piece; a horse’s head. Looking at the finished piece (can you believe that was a speed carve?!), we’d say it’s a hit!

Simon O'Rourke with the finished speed carve horse

Simon with the finished speed carve horse

Arb Show 2019 Auction

At the end of each day the pieces were auctioned off for the charity Greenfingers, which creates gardens and respite spaces for children in hospice care across the UK. Thank you to the winning bidders, and we hope you enjoy your sculptures!

"<yoastmark

If you’re thinking of coming to check out one of Simon’s demonstrations in future, we thoroughly recommend The Arb Show.

The venue (The National Arboretum), is actually worth a visit at any time of the year. However, during The Arb Show, you can also enjoy exhibits from companies who work with trees in a whole range of ways.

Stihl Exhibit at The Arb Show 2019

Stihl Exhibit at The Arb Show 2019

Beyond the Carving

Exhibitors range from manufacturers of equipment for people working in forestry to conservation groups, from forest schools to artists using trees. Tree surgeons, tree carvers, timber processors and even tree climbers also come along to enjoy the show! In fact, it is also home to the 3ATC open climbing competition!

As well as the expected food stands, there is also entertainment and the opportunity to try your own hand at some of the timber sports – or even axe throwing!

With camping on site for those who want to spend both days enjoying the show, maybe we’ll see you next year?

Spirit of Ecstasy: Recreating an Icon

Spirit of Ecstasy: Recreating an Icon 150 150 Simon O'Rourke
  • She was originally created in 1909
  • She’s based on the then company secretary, Eleanor Thornton
  • The owner of the company didn’t agree with her presence, even though today she is synonymous with the brand
  • She can be made from silver and gold plated nickel or steel, stainless steel, crystal, with adaptations such as black matte paint, diamond studding or even ‘faberge’ styling
  • She has many names, and is sometimes still known today as Emily, Silver Lady, or Flying Lady
  • We’re featuring her in this blog because it ties in with the London Motor Show which is being held this week

Can you guess what today’s blog is about yet?

What about from these photos of the work in progress?

Work in Progress: Spirit of Ecstasy by Simon O'Rourke

Today’s featured work in progress

Spirit of Ecstasy

Some of that was probably a bit obscure, so we won’t leave in any more suspense!

Today we’re featuring Simon’s representation of ‘The Spirit of Ecstasy’; the figurine found on the bonnet of Rolls Royce Vehicles. If you were to wander around the Motor Show this weekend, we’re pretty sure you’d see a few different examples of her – but none quite as tall as this one!

Spirit of Ecstasy by Simon O'Rourke

Spirit of Ecstasy by Simon O’Rourke

The Background Story

This particular sculpting of the iconic figure was a private commission for the garden of a Rolls Royce enthusiast. She was quite the undertaking as she is ‘larger than life’, and took several days to complete. With her grace and elegance though we think that she’s the perfect addition to this car-lover’s garden, especially months on, when the plants have matured around her plinth.

Spirit of Ecstasy by Simon O'Rourke with matured plants

Spirit of Ecstasy with matured plants

Something for the Future

The figure of ‘The Flying Lady’ lends itself nicely to becoming a classical-looking garden statue. It got us wondering though, for all the other car lovers out there, what other emblems or figurines would you like to see Simon carve?

Perhaps the Ferrari horse for their head office in Maranello?

Maybe a jaguar for a fountain of the grounds of ….well, Jaguar?

Or, for something really obscure, a Marlin for a classic car collector?

Comment or tweet to let us know your ideas!

Spirit of Ecstasy by Simon O'Rourke

Spirit of Ecstasy by Simon O’Rourke

If you would like a carving for your offices, community area, home or garden to reflect your passion or hobby, contact @[email protected] to commission something truly unique to you.

A Dutch Jungle Throne!

A Dutch Jungle Throne! 150 150 Simon O'Rourke
The Setting

Every year the village of Garderen (Netherlands) is proud to be home to Zandsculpturenfestijn. It describes itself as  ‘Europe’s most beautiful sand sculpture park’  and has won several regional tourist awards. As well as sand sculpture, the outdoor part of the exhibit also features wooden carvings, completed each summer. Simon was invited to contribute again this year, and was excited to take part. This is the setting for this week’s featured sculpture: A Dutch Jungle Throne.

Simon working on his exhibit – easily identifiable by his Stihl clothing!

A Jungle Throne

The theme for the year (‘Journey Round the World’) gave a LOT of scope for the artists to create. With such an open title, they were free to sculpt natural wonders, architecture, people or animals. The artists who were there at the same time as Simon though all focused on nature, and created animal carvings. Wanting to help build a united exhibit, Simon decided to also focus on animals in his piece. As this wasn’t a commission where he had to replicate one specific animal, he decided to stretch himself and try something a little different, inspired by one of the indoor sand pieces.

The exhibit in question was a huge jungle scene with lots of different animals. Simon set himself the challenge of creating something similar which would feature lots of different animals. The result? A hollowed-out seat featuring not one or two animals, but 34! A ‘Jungle Throne’ fit for even King Louis, Jungle Book’s “King of the Swingers”!

The finished 'Jungle Throne'

The finished ‘Jungle Throne’

The Beginning….

Simon had a few ideas, but the decision about the final piece was settled by the piece of wood itself! Nick Lumb of Acorn Furniture (where Simon began his carving work) recently said that one of the enjoyable things with working with wood is that you never reach the end of learning about it. Other materials behave a specific way under a specific set of conditions. However, wood is different every time – you never know fully what you will get  until you begin to cut. In this instance, Simon discovered some defects in the centre, so decided to hollow out the timber, and the concept of a ‘seat’ was born!

Two different angles showing the animals in the jungle throne

Two different angles showing the animals in the jungle throne

Jungle Seat by Simon O'Rourke at Zandsculpturenfestijn

Two more angles showing the animals in the jungle seat

The Details

Creating 3d, realistic animals like this is no easy task. Simon had to find a way to create depth when the piece of wood didn’t allow for large, dramatic shapes. The effectiveness of the piece is all down to deep relief cuts to create the shapes of the animals and foliage, with much more shallow cuts and markings to create the outstanding details, such as the smile in the eyes of the sloth, or the slightly grumpy crocodile as well as the varying textures of fur, feather and scales.

Close up of the sloth and crocodile in the Jungle Seat by Simon O'Rourke

Close up of the sloth and crocodile

Much as we love them, photos of all 34 animals would be a bit much for one blog post. Why don’t you take a look at them here and let us know your favourite? You can also watch this video (posted below for those who can see it) to see Simon’s own thoughts about the seat too!

Simon is available for events around the world. If you would like to invite him to your tree carving event, contact [email protected]

 

Face to Face

Face to Face 150 150 Simon O'Rourke

Earlier in May, Simon had the privilege of being one of the artists to take part in The Sculpture Garden 2019; the launch event of The Cookham Art Festival in Berkshire. He created this fantastic exhibit ‘Face to Face as part of that event.

THE FESTIVAL

The festival itself is over 40 years old, has around 15,000 attendees, and celebrates art in several forms. This year includes the sculpture garden, music, galleries, food, poetry, spoken word, and theatre to name a few. What an amazing, rounded celebration of creativity, talent and skill!

THE EVENT

The Sculpture Garden was a brilliant launch to the festival. It was held at The Odney Club, a private house and gardens owned by the John Lewis Partnership. The venue is not normally open to the public, so the exclusivity added to the festival atmosphere. Visitors to the sculpture garden enjoyed some beautiful carved creations, and live demonstrations of works in progress. They could also the beauty of creation itself as they walked round the stunning gardens. In total there were around 150 exhibits for people to enjoy over the two weeks of the show, created by around 30 different artists, all working in different mediums and styles. Such rich variety in this exhibition alone!

The Odney Club, venue for the 2019 Sculpture Garden

The Odney Club, venue for the 2019 Sculpture Garden

 

SIMON’S EXHIBITS

Simon’s contribution were two finished faces, one which was first created during the APF Show last year (you can flashback and watch the video here). He also exhibited a third smaller version which he completed at the exhibition as a demonstration. Watching him live is undoubtedly the most impressive, but for those who are reading this blog from a distance and won’t be able to catch him at any of the shows this year, here’s the video! For those who are fascinated by the chainsaws and tools, it’s a Milwaukee Cordless Angle Grinder!

 

Face I on display at The Sculpture Garden 2019

Face I on display at The Sculpture Garden 2019

 

ABOUT THE ART

These are a very different style from Simon’s typical human form work, so we asked him to share a little bit more about his inspiration and process:

“I have always had a passion for the human form, and to recreate the human race in a realistic manner can be difficult. I wanted to zone in on sections of the face, giving the impression you’re seeing a snapshot up close. With the one with the detailed eye I wanted to recreate the feel of a real eye sculpturally, and capture the reflection and depth without the use of colour. When we see a face our brains determine what we are seeing with the help of colour and light. When you remove the colour element it really helps you to break down what makes us see and perceive depth. I make cuts deeper than they would be in reality in order to cast a darker shadow to give the illusion of depth.”

 

Face II on display at The Sculpture Garden 2019

Face II on display at The Sculpture Garden 2019

Face I, Face II and Face III are on show as part of the sculpture garden and can be purchased by contacting curator Lucy Irvine on [email protected]. If you who would like to commission a bespoke ‘Face’, email [email protected]

For those who enjoy watching the videos of Simon working, we are now in festival and competition season, so he will be competing and demonstrating in various locations over the next few months. If you would like to see him in action, watch this space or our Facebook page for details!

 

 

 

 

 

 

 

Earth Day 2019

Earth Day 2019 700 400 Simon O'Rourke
,Honouring Earth Day 2019

We’re marking Earth Day 2019, by talking about one of Earth’s (and Tree Carving’s!) most vital resources: Trees!

Trees are the biggest plants on the planet. They give us oxygen, store carbon, stabilise the soil and give life to the world’s wildlife. They are also the material that forms the basis for everything that Simon produces , whether life size human form commission, furniture, or accessories (have you ever seen his bowties?!)

Carving a dragon into a fallen tree

Carving a dragon into a fallen tree

Why Tree Carving?

Simon definitely hadn’t planned on tree carving as a career. After A levels, he began a degree in illustration. He actually hoped and planned to be a freelance illustrator of children’s books. After graduation however, he took a job with Acorn Arbor Care as a tree surgeon. The idea was, this would give him an income while he built up his illustration portfolio. And so, at this time he began working with chainsaws. In fact, the first saw Simon used was made by Stihl, . In one of those ‘full circle’ kind of stories, they are now his current sponsors!

Realising he could be creative as well as practical with a chain saw, Simon tried his hand at carving. There was something special for him in discovering that “such a potentially destructive tool can be used to create beauty”. After that discover, the rest – as they say – is history!

As well as the appeal of the chain saw, the wood itself is full of appeal. Part of this is in its ever-changing nature, which then shapes the finished product, beyond Simon’s first idea. He can plan a piece with detailed sketches and have an idea of what he wants it to look like. However it has to evolve a lot once the carving actually begins. The grain dictates where the natural strength of the timber is and can give so much inspiration for the shape of a sculpture. Every tree is unique and you never know what you’re going to find when you cut into a piece.

 

The timber used for this carving of a shire horse. The natural grain enhances the texture and shape of the horse.

The timber used for this carving of a shire horse. The natural grain enhances the texture and shape of the horse.

Sourcing Wood Responsibly

On Earth Day 2019  when we are thinking about preserving the world’s resources, it is also natural to be wondering where all this wood is coming from. Is tree carving damaging to the environment?

Far from it. Tree carving is one of the more sustainable mediums for sculpture. Working with a natural material means that although it weathers well, eventually it will degrade, as all wood does. At this point, it is returned to the earth – no land or ocean filling here!
In addition, Simon uses trees that have either fallen naturally, or trees that have become dangerous or diseased. Most importantly, he always uses wood that has come from a sustainable managed location. This includes domestic housing and managed forests and woodlands. One example of this which went viral earlier this year, is his carving ‘ ‘The Dragon of Bethesda‘. This dragon commission actually came about because of an arboretum owner wishing to do something with a storm-damaged fallen tree.

The Dragon of Bethesda, before and after

The Dragon of Bethesda, before and after

Forest Education

As lovers of the outdoors and environmentally aware citizens, Simon and his wife Liz enjoy the opportunities that they get to educate others too about the resources we have and how to take care of them through their work. Whether it takes the form of educational captions on a nature trail commission, sharing their hearts in interviews, or through Liz’s role as a forest school teacher, their appreciation for the world around them is clear, and not only do they model responsible use of the world’s resources as individuals and businesses, but they also inspire others to do the same.

Liz at a forest school session. They even recycle the re-purposed wood, using off-cuts from scupltures for classroom supplies like these wood chips!

Liz at a forest school session. They even recycle the repurposed wood, using off-cuts from sculptures for classroom supplies like these wood chips!

You can talk to us about Simon tranforming your own damaged or fallen trees at [email protected]